On Mon, Jun 01, 2015 at 05:02:59PM +0200, Hans de Goede wrote:
> The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been using
> the same dts for both models. Unfortunately this does not work for the otg
> controller, on the M9 this is routed to a micro-usb connector on the outside,
> while as on the A1000G-quad it is connected to an usb to sata bridge
> (which is not populated on the M9 pcb).
>
> This commit adds a new dts for the Mele-A1000G-quad to allow using
> different otg controller settings on the 2 boards.
>
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/{sun6i-a31-m9.dts => sun6i-a31-a1000g-quad.dts} | 4 ++--
Didn't we say that we were trying to set the vendor name in the DTs
now, at least for the new ones?
I can fix this and apply it if it's ok for you.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
Attachment:
signature.asc
Description: Digital signature
