Re: [PATCH v2] ARM: zynq: DT: Use the zynq binding with macb

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Wed, May 27, 2015 at 02:58:48PM -0500, Nathan Sullivan wrote:
> Use the new zynq binding for macb ethernet, since it will disable half
> duplex gigabit like the Zynq TRM says to do. Also allow the compatible
> cadence gem binding that won't disable half duplex but works otherwise.
> 
> Signed-off-by: Nathan Sullivan <nathan.sullivan@xxxxxx>
> ---
>  arch/arm/boot/dts/zynq-7000.dtsi |    6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
> index a5cd2ed..154bf93 100644
> --- a/arch/arm/boot/dts/zynq-7000.dtsi
> +++ b/arch/arm/boot/dts/zynq-7000.dtsi
> @@ -57,7 +57,7 @@
>  		regulator-always-on;
>  	};
>  
> -	amba {
> +	amba@0 {
>  		compatible = "simple-bus";
>  		#address-cells = <1>;
>  		#size-cells = <1>;

ePAPR (which we follow on ARM) requires a reg= property if you have
an '@' number.

-- 
FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up
according to speedtest.net.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux