Re: [PATCHv2] ARM: mvebu: add support for the new Aramda 385 based Linksys boards

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Andrew, Imre,

On 25/05/2015 16:08, Andrew Lunn wrote:
> On Mon, May 25, 2015 at 02:58:22PM +0200, Gregory CLEMENT wrote:
>> Hi Imre,
>>
>> On 20/05/2015 23:14, Imre Kaloz wrote:
>>> This patch adds support for the Linksys WRT1200AC (Caiman) and
>>> the Linksys WRT1900AC v2 (Cobra).
>>>
>>> Both boards have:
>>>
>>> - 2 Marvell 88W8864 radios
>>> - 1 USB 3.0 port
>>> - 1 USB 2.0/eSATAp port
>>> - 2 Ethernet interfaces connected to a 88E6176 switch (1x WAN + 4x LAN)
>>> - 128MB NAND flash
>>> - 512MB RAM
>>>
>>> Signed-off-by: Imre Kaloz <kaloz@xxxxxxxxxxx>
>>>
>>> ---
>>> Changes since v1: added DSA support
>>> ---
>>> The only difference between the two boards is the radio configuration
>>> (2x2 vs 3x3), so everything except the leds (to be named properly)
>>> is in the dtsi file. When the wireless driver will be submitted
>>> upstream, the powertables (calibration data) will end up in the board
>>> specific files, tho.
>>
>> it seems that you missed my comment about removing bootargs and just using
>> stdout-path = "serial0:115200n8";
>>
>> If you agree and if there is no remark about the DSA part from Andrew, I can
>> take car of it while applying your patch on mvebu/dt.
> 
> DSA looks fine
> 
> Acked-by: Andrew Lunn <andrew@xxxxxxx>

applied on mvebu/dt. I also fixed the title: s/Aramda/Armada/

Thanks,

Gregory


> 
> Thanks
> 	Andrew
> 
>>
>>
>> Thanks,
>>
>> Gregory
>>
>> [...]
>>
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
>>
>> [...]
>>
>>> +	chosen {
>>> +		bootargs = "console=ttyS0,115200";
>>> +		stdout-path = &uart0;
>> Just here
>>> +	};
>>
>>
>> [...]
>> -- 
>> Gregory Clement, Free Electrons
>> Kernel, drivers, real-time and embedded Linux
>> development, consulting, training and support.
>> http://free-electrons.com
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 


-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux