During the review of the Juno DT files I've noticed that the GIC node label had two digits swapped leading to a different address being shown in the /sys/devices fs. Sudeep also pointed that public revisions of the Juno documentation list a different frequency for the FAXI system than what the one I've been using when creating the DT file. Verified with the firmware people to be the correct value in the shipped systems. Reported-by: Sudeep Holla <sudeep.holla@xxxxxxx> Signed-off-by: Liviu Dudau <Liviu.Dudau@xxxxxxx> Acked-by: Sudeep Holla <sudeep.holla@xxxxxxx> Acked-by: Jon Medhurst <tixy@xxxxxxxxxx> --- arch/arm64/boot/dts/arm/juno-clocks.dtsi | 4 ++-- arch/arm64/boot/dts/arm/juno.dts | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/arm/juno-clocks.dtsi b/arch/arm64/boot/dts/arm/juno-clocks.dtsi index c9b89ef..25352ed 100644 --- a/arch/arm64/boot/dts/arm/juno-clocks.dtsi +++ b/arch/arm64/boot/dts/arm/juno-clocks.dtsi @@ -36,9 +36,9 @@ clock-output-names = "apb_pclk"; }; - soc_faxiclk: refclk533mhz { + soc_faxiclk: refclk400mhz { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <533000000>; + clock-frequency = <400000000>; clock-output-names = "faxi_clk"; }; diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts index 5e9110a..7ab0713 100644 --- a/arch/arm64/boot/dts/arm/juno.dts +++ b/arch/arm64/boot/dts/arm/juno.dts @@ -98,7 +98,7 @@ <0x00000008 0x80000000 0x1 0x80000000>; }; - gic: interrupt-controller@2c001000 { + gic: interrupt-controller@2c010000 { compatible = "arm,gic-400", "arm,cortex-a15-gic"; reg = <0x0 0x2c010000 0 0x1000>, <0x0 0x2c02f000 0 0x2000>, -- 2.4.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html