Re: [PATCHv5 2/5] ARM: dts: Odroid-XU3 Enable TMU at Exynos5422 base

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




2015-05-19 16:28 GMT+09:00 Anand Moon <linux.amoon@xxxxxxxxx>:
> On 15 May 2015 at 05:42, Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx> wrote:
>> 2015-05-15 1:16 GMT+09:00 Anand Moon <linux.amoon@xxxxxxxxx>:
>>> On 13 May 2015 at 14:02, Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx> wrote:
>>>> 2015-05-13 17:21 GMT+09:00 Anand Moon <linux.amoon@xxxxxxxxx>:
>>>>> On 13 May 2015 at 12:51, Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx> wrote:
>>>>>> 2015-05-13 15:36 GMT+09:00 Anand Moon <linux.amoon@xxxxxxxxx>:
>>>>>>> This changes enables TMU IP block on the Exynos5422 Odroid-XU3
>>>>>>> device.
>>>>>>>
>>>>>>> Tested-by: Markus Reichl <m.reichl@xxxxxxxxxxxxx>
>>>>>>> Acked-by: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
>>>>>>> Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx>
>>>>>>> ---
>>>>>>>  arch/arm/boot/dts/exynos5422-odroidxu3.dts | 25 +++++++++++++++++++++++++
>>>>>>>  1 file changed, 25 insertions(+)
>>>>>>>
>>>>>>> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
>>>>>>> index 9446e28..cd78816 100644
>>>>>>> --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
>>>>>>> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
>>>>>>> @@ -319,6 +319,31 @@
>>>>>>>                 #cooling-cells = <2>;
>>>>>>>                 cooling-levels = <0 130 170 230>;
>>>>>>>         };
>>>>>>> +
>>>>>>> +       tmu@10060000 {
>>>>>>
>>>>>> Here and for other overrides please use label notation, like:
>>>>>>
>>>>>> &tmu_cpu0 {
>>>>>>               ...
>>>>>> };
>>>>>>
>>>>>>> +               vtmu-supply = <&ldo10_reg>;
>>>>>>
>>>>>> I am curious, how did you find that LDO10 supplies TMU unit?
>>>>>>
>>>>>> Best regards,
>>>>>> Krzysztof
>>>>>
>>>>> Hi Krzysztof,
>>>>>
>>>>> I have re-base my work on earlier Lukasz Majewski patches.
>>>>>
>>>>> https://patchwork.kernel.org/patch/5693201/
>>>>
>>>> NAK.
>>>> I am sorry, but this is not sufficient explanation. Actually such
>>>> explanation could mean that you did just blindly copied everything
>>>> instead of developing it.
>>>>
>>>> You cannot use some regulator here just because some Exynos4 boards
>>>> use it. You have to be sure that this regulator supplies this part of
>>>> SoC or device.
>>>
>>> Hi Krzysztof,
>>>
>>> After going through the schematics, I came to understanding that their is
>>> missing regulator related to TEMP SE in the exynos5422-odroidxu3.dts.
>>>
>>> Below is the schematic of the board.
>>>
>>> http://dn.odroid.com/5422/ODROID-XU3/Schematics/XU3_MAIN_REV0.2.PDF
>>>
>>>   ldo18_reg: LDO18 {
>>>                                          regulator-name = "vdd_ldo18";
>>>                                          regulator-min-microvolt = <1800000>;
>>>                                          regulator-max-microvolt = <1800000>;
>>>                                          regulator-always-on;
>>>                                };
>>
>> The output of LDO18 goes to VDD_EMMC_1V8. This is not regulator for TMU.
>>
>> I think the schematics are missing some of details but it can be deducted that:
>> 1. TEMP SE is supplied by VDD18_TS power domain. It consists of 5
>> pairs of pins (XTSTEST_OUT[0-4], XTSEXT_RES[0-4]).
>> 2. The VDD18_TS01, VDD18_TS23 and VDD18_TS4 are wired to the LDO7 of
>> S2MPS11 PMIC.
>> 3. I confirmed with the Exynos5422 datasheet that these
>> VDD18_TS{01,23,4} supply the XTSTEST pins (OUT and RES).
>>
>> So the LDO7 it is... but before using it there is a caveat. The LDO7
>> is also connected to VDD of MIPI, HDMI and few more. So when you use
>> this regulator in TMU it may be turned off by TMU driver (e.g. during
>> unbind). In such case these other blocks also should be tested and
>> checked whether they take this regulator and enable it.
>
> hi Krzysztof,
>
> I tried to use the LDO7 regulator for TMU but it failed to register.
>
> [    3.231329] ina2xx 0-0045: power monitor ina231 (Rshunt = 10000 uOhm)
> [    3.237691] thermal thermal_zone0: failed to read out thermal zone (-22)
> [    3.243033] exynos-tmu 10060000.tmu: Looking up vtmu-supply from device tree
> [    3.243936] thermal thermal_zone1: failed to read out thermal zone (-22)
> [    3.249791] exynos-tmu 10064000.tmu: Looking up vtmu-supply from device tree
> [    3.250677] thermal thermal_zone2: failed to read out thermal zone (-22)
> [    3.256410] exynos-tmu 10068000.tmu: Looking up vtmu-supply from device tree
> [    3.257345] thermal thermal_zone3: failed to read out thermal zone (-22)
> [    3.263050] exynos-tmu 1006c000.tmu: Looking up vtmu-supply from device tree
> [    3.263984] thermal thermal_zone4: failed to read out thermal zone (-22)
> [    3.269769] exynos-tmu 100a0000.tmu: Looking up vtmu-supply from device tree
> [    3.270363] usb 5-1: New USB device found, idVendor=0424, idProduct=9514
> [    3.276389] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

Indeed.

Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux