Re: [PATCHv5 2/5] ARM: dts: Odroid-XU3 Enable TMU at Exynos5422 base

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 15 May 2015 at 05:42, Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx> wrote:
> 2015-05-15 1:16 GMT+09:00 Anand Moon <linux.amoon@xxxxxxxxx>:
>> On 13 May 2015 at 14:02, Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx> wrote:
>>> 2015-05-13 17:21 GMT+09:00 Anand Moon <linux.amoon@xxxxxxxxx>:
>>>> On 13 May 2015 at 12:51, Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx> wrote:
>>>>> 2015-05-13 15:36 GMT+09:00 Anand Moon <linux.amoon@xxxxxxxxx>:
>>>>>> This changes enables TMU IP block on the Exynos5422 Odroid-XU3
>>>>>> device.
>>>>>>
>>>>>> Tested-by: Markus Reichl <m.reichl@xxxxxxxxxxxxx>
>>>>>> Acked-by: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
>>>>>> Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx>
>>>>>> ---
>>>>>>  arch/arm/boot/dts/exynos5422-odroidxu3.dts | 25 +++++++++++++++++++++++++
>>>>>>  1 file changed, 25 insertions(+)
>>>>>>
>>>>>> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
>>>>>> index 9446e28..cd78816 100644
>>>>>> --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
>>>>>> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
>>>>>> @@ -319,6 +319,31 @@
>>>>>>                 #cooling-cells = <2>;
>>>>>>                 cooling-levels = <0 130 170 230>;
>>>>>>         };
>>>>>> +
>>>>>> +       tmu@10060000 {
>>>>>
>>>>> Here and for other overrides please use label notation, like:
>>>>>
>>>>> &tmu_cpu0 {
>>>>>               ...
>>>>> };
>>>>>
>>>>>> +               vtmu-supply = <&ldo10_reg>;
>>>>>
>>>>> I am curious, how did you find that LDO10 supplies TMU unit?
>>>>>
>>>>> Best regards,
>>>>> Krzysztof
>>>>
>>>> Hi Krzysztof,
>>>>
>>>> I have re-base my work on earlier Lukasz Majewski patches.
>>>>
>>>> https://patchwork.kernel.org/patch/5693201/
>>>
>>> NAK.
>>> I am sorry, but this is not sufficient explanation. Actually such
>>> explanation could mean that you did just blindly copied everything
>>> instead of developing it.
>>>
>>> You cannot use some regulator here just because some Exynos4 boards
>>> use it. You have to be sure that this regulator supplies this part of
>>> SoC or device.
>>
>> Hi Krzysztof,
>>
>> After going through the schematics, I came to understanding that their is
>> missing regulator related to TEMP SE in the exynos5422-odroidxu3.dts.
>>
>> Below is the schematic of the board.
>>
>> http://dn.odroid.com/5422/ODROID-XU3/Schematics/XU3_MAIN_REV0.2.PDF
>>
>>   ldo18_reg: LDO18 {
>>                                          regulator-name = "vdd_ldo18";
>>                                          regulator-min-microvolt = <1800000>;
>>                                          regulator-max-microvolt = <1800000>;
>>                                          regulator-always-on;
>>                                };
>
> The output of LDO18 goes to VDD_EMMC_1V8. This is not regulator for TMU.
>
> I think the schematics are missing some of details but it can be deducted that:
> 1. TEMP SE is supplied by VDD18_TS power domain. It consists of 5
> pairs of pins (XTSTEST_OUT[0-4], XTSEXT_RES[0-4]).
> 2. The VDD18_TS01, VDD18_TS23 and VDD18_TS4 are wired to the LDO7 of
> S2MPS11 PMIC.
> 3. I confirmed with the Exynos5422 datasheet that these
> VDD18_TS{01,23,4} supply the XTSTEST pins (OUT and RES).
>
> So the LDO7 it is... but before using it there is a caveat. The LDO7
> is also connected to VDD of MIPI, HDMI and few more. So when you use
> this regulator in TMU it may be turned off by TMU driver (e.g. during
> unbind). In such case these other blocks also should be tested and
> checked whether they take this regulator and enable it.

hi Krzysztof,

I tried to use the LDO7 regulator for TMU but it failed to register.

[    3.231329] ina2xx 0-0045: power monitor ina231 (Rshunt = 10000 uOhm)
[    3.237691] thermal thermal_zone0: failed to read out thermal zone (-22)
[    3.243033] exynos-tmu 10060000.tmu: Looking up vtmu-supply from device tree
[    3.243936] thermal thermal_zone1: failed to read out thermal zone (-22)
[    3.249791] exynos-tmu 10064000.tmu: Looking up vtmu-supply from device tree
[    3.250677] thermal thermal_zone2: failed to read out thermal zone (-22)
[    3.256410] exynos-tmu 10068000.tmu: Looking up vtmu-supply from device tree
[    3.257345] thermal thermal_zone3: failed to read out thermal zone (-22)
[    3.263050] exynos-tmu 1006c000.tmu: Looking up vtmu-supply from device tree
[    3.263984] thermal thermal_zone4: failed to read out thermal zone (-22)
[    3.269769] exynos-tmu 100a0000.tmu: Looking up vtmu-supply from device tree
[    3.270363] usb 5-1: New USB device found, idVendor=0424, idProduct=9514
[    3.276389] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

-Anand Moon

>
> Best regards,
> Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux