Re: [PATCH 0/5] Marvell PXA1928 USB support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 14.05.2015 00:48, Rob Herring wrote:
This series adds USB PHYs and EHCI host drivers for the Marvell PXA1928
SOC.

The OTG block is based on ChipIdea and works with "chipidea,usb2"
compatible driver as is just by adding the PHY driver. Yay!

Rob

Rob Herring (5):
   dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings
   dt-bindings: Add Marvell PXA1928 USB EHCI controller binding
   phy: Add Marvell USB 2.0 OTG 28nm PHY
   phy: add Marvell HSIC 28nm PHY
   usb: add pxa1928 ehci support

  .../devicetree/bindings/phy/pxa1928-usb-phy.txt    |  18 ++
  .../devicetree/bindings/usb/ehci-pxa1928.txt       |  19 ++
  drivers/phy/Kconfig                                |  20 ++
  drivers/phy/Makefile                               |   2 +
  drivers/phy/phy-mv-hsic.c                          | 208 +++++++++++++
  drivers/phy/phy-mv-usb2.c                          | 329 +++++++++++++++++++++

[Adding some MVEBU guys]

Rob,

I had a look at the USB PHYs of some of the other Marvell SoCs a while
ago for the barebox bootloader [1]. Marvell seems to distinguish the
USB PHY type by technology node, e.g. 28nm like the one above. For the
most used Marvell SoCs, i.e. Kirkwood, Dove, and Armada 370/XP, they all
use a different technology node and we could either use the SoC name
or the technology node as compatible.

Anyway, if you are introducing new PHY drivers with _that_ generic
names, it will either clash with every other Marvell USB PHYs -
or we'll have to add the PHY code into the drivers above.

[1] http://lists.infradead.org/pipermail/barebox/2014-June/019600.html

  drivers/usb/host/Kconfig                           |  15 +-
  drivers/usb/host/Makefile                          |   1 +
  drivers/usb/host/ehci-mv-of.c                      | 243 +++++++++++++++
  9 files changed, 854 insertions(+), 1 deletion(-)
  create mode 100644 Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt
  create mode 100644 Documentation/devicetree/bindings/usb/ehci-pxa1928.txt
  create mode 100644 drivers/phy/phy-mv-hsic.c
  create mode 100644 drivers/phy/phy-mv-usb2.c
  create mode 100644 drivers/usb/host/ehci-mv-of.c


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux