This series adds USB PHYs and EHCI host drivers for the Marvell PXA1928 SOC. The OTG block is based on ChipIdea and works with "chipidea,usb2" compatible driver as is just by adding the PHY driver. Yay! Rob Rob Herring (5): dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings dt-bindings: Add Marvell PXA1928 USB EHCI controller binding phy: Add Marvell USB 2.0 OTG 28nm PHY phy: add Marvell HSIC 28nm PHY usb: add pxa1928 ehci support .../devicetree/bindings/phy/pxa1928-usb-phy.txt | 18 ++ .../devicetree/bindings/usb/ehci-pxa1928.txt | 19 ++ drivers/phy/Kconfig | 20 ++ drivers/phy/Makefile | 2 + drivers/phy/phy-mv-hsic.c | 208 +++++++++++++ drivers/phy/phy-mv-usb2.c | 329 +++++++++++++++++++++ drivers/usb/host/Kconfig | 15 +- drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-mv-of.c | 243 +++++++++++++++ 9 files changed, 854 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt create mode 100644 Documentation/devicetree/bindings/usb/ehci-pxa1928.txt create mode 100644 drivers/phy/phy-mv-hsic.c create mode 100644 drivers/phy/phy-mv-usb2.c create mode 100644 drivers/usb/host/ehci-mv-of.c -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
