Few changes since v2, and the changes are *only* to the SATA driver, not to any of the DT bindings or the PHY driver. I'm resending the whole series for completeness. I'll list the changelog in each patch, but in summary: v2 -> v3: - straighten out endianness for big endian MIPS and ARM in AHCI driver - rename sata_brcmstb.c to ahci_brcmstb.c - bind ahci_brcmstb.c against the specific string, "brcm,bcm7445-ahci" instead of the generic one Brian Brian Norris (5): Documentation: devicetree: add Broadcom SATA binding Documentation: devicetree: add Broadcom SATA PHY binding ata: add Broadcom AHCI SATA3 driver for STB chips phy: add Broadcom SATA3 PHY driver for Broadcom STB SoCs ARM: dts: brcmstb: add nodes for SATA controller and PHY .../devicetree/bindings/ata/brcm,sata-brcmstb.txt | 35 +++ .../bindings/phy/brcm,brcmstb-sata-phy.txt | 40 +++ arch/arm/boot/dts/bcm7445.dtsi | 37 +++ drivers/ata/Kconfig | 9 + drivers/ata/Makefile | 1 + drivers/ata/ahci_brcmstb.c | 322 +++++++++++++++++++++ drivers/phy/Kconfig | 9 + drivers/phy/Makefile | 1 + drivers/phy/phy-brcmstb-sata.c | 216 ++++++++++++++ 9 files changed, 670 insertions(+) create mode 100644 Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt create mode 100644 Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt create mode 100644 drivers/ata/ahci_brcmstb.c create mode 100644 drivers/phy/phy-brcmstb-sata.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
