The current phy init consists of hardware power-up, as well as QCOM-specific eUSB2 init code. Split it into two parts, to make room for such non-QCOM init code. Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx> --- drivers/phy/phy-snps-eusb2.c | 96 +++++++++++++++++++++++------------- 1 file changed, 63 insertions(+), 33 deletions(-) diff --git a/drivers/phy/phy-snps-eusb2.c b/drivers/phy/phy-snps-eusb2.c index 405278c18..fa878389f 100644 --- a/drivers/phy/phy-snps-eusb2.c +++ b/drivers/phy/phy-snps-eusb2.c @@ -121,6 +121,10 @@ static const char * const eusb2_hsphy_vreg_names[] = { #define EUSB2_NUM_VREGS ARRAY_SIZE(eusb2_hsphy_vreg_names) +struct snps_eusb2_phy_drvdata { + int (*phy_init)(struct phy *p); +}; + struct snps_eusb2_hsphy { struct phy *phy; void __iomem *base; @@ -133,6 +137,8 @@ struct snps_eusb2_hsphy { enum phy_mode mode; struct phy *repeater; + + const struct snps_eusb2_phy_drvdata *data; }; static int snps_eusb2_hsphy_set_mode(struct phy *p, enum phy_mode mode, int submode) @@ -230,41 +236,11 @@ static int qcom_eusb2_ref_clk_init(struct snps_eusb2_hsphy *phy) return 0; } -static int snps_eusb2_hsphy_init(struct phy *p) +static int qcom_snps_eusb2_hsphy_init(struct phy *p) { struct snps_eusb2_hsphy *phy = phy_get_drvdata(p); int ret; - ret = regulator_bulk_enable(ARRAY_SIZE(phy->vregs), phy->vregs); - if (ret) - return ret; - - ret = phy_init(phy->repeater); - if (ret) { - dev_err(&p->dev, "repeater init failed. %d\n", ret); - goto disable_vreg; - } - - ret = clk_prepare_enable(phy->ref_clk); - if (ret) { - dev_err(&p->dev, "failed to enable ref clock, %d\n", ret); - goto disable_vreg; - } - - ret = reset_control_assert(phy->phy_reset); - if (ret) { - dev_err(&p->dev, "failed to assert phy_reset, %d\n", ret); - goto disable_ref_clk; - } - - usleep_range(100, 150); - - ret = reset_control_deassert(phy->phy_reset); - if (ret) { - dev_err(&p->dev, "failed to de-assert phy_reset, %d\n", ret); - goto disable_ref_clk; - } - snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_CFG0, CMN_CTRL_OVERRIDE_EN, CMN_CTRL_OVERRIDE_EN); @@ -334,6 +310,52 @@ static int snps_eusb2_hsphy_init(struct phy *p) USB2_SUSPEND_N_SEL, 0); return 0; +} + +static const struct snps_eusb2_phy_drvdata sm8550_snps_eusb2_phy = { + .phy_init = qcom_snps_eusb2_hsphy_init, +}; + +static int snps_eusb2_hsphy_init(struct phy *p) +{ + struct snps_eusb2_hsphy *phy = phy_get_drvdata(p); + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(phy->vregs), phy->vregs); + if (ret) + return ret; + + ret = phy_init(phy->repeater); + if (ret) { + dev_err(&p->dev, "repeater init failed. %d\n", ret); + goto disable_vreg; + } + + ret = clk_prepare_enable(phy->ref_clk); + if (ret) { + dev_err(&p->dev, "failed to enable ref clock, %d\n", ret); + goto disable_vreg; + } + + ret = reset_control_assert(phy->phy_reset); + if (ret) { + dev_err(&p->dev, "failed to assert phy_reset, %d\n", ret); + goto disable_ref_clk; + } + + usleep_range(100, 150); + + ret = reset_control_deassert(phy->phy_reset); + if (ret) { + dev_err(&p->dev, "failed to de-assert phy_reset, %d\n", ret); + goto disable_ref_clk; + } + + ret = phy->data->phy_init(p); + if (ret) + goto disable_ref_clk; + + return 0; disable_ref_clk: clk_disable_unprepare(phy->ref_clk); @@ -371,6 +393,7 @@ static int snps_eusb2_hsphy_probe(struct platform_device *pdev) struct snps_eusb2_hsphy *phy; struct phy_provider *phy_provider; struct phy *generic_phy; + const struct snps_eusb2_phy_drvdata *drv_data; int ret, i; int num; @@ -378,6 +401,11 @@ static int snps_eusb2_hsphy_probe(struct platform_device *pdev) if (!phy) return -ENOMEM; + drv_data = of_device_get_match_data(dev); + if (!drv_data) + return -EINVAL; + phy->data = drv_data; + phy->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(phy->base)) return PTR_ERR(phy->base); @@ -424,8 +452,10 @@ static int snps_eusb2_hsphy_probe(struct platform_device *pdev) } static const struct of_device_id snps_eusb2_hsphy_of_match_table[] = { - { .compatible = "qcom,sm8550-snps-eusb2-phy", }, - { }, + { + .compatible = "qcom,sm8550-snps-eusb2-phy", + .data = &sm8550_snps_eusb2_phy, + }, { }, }; MODULE_DEVICE_TABLE(of, snps_eusb2_hsphy_of_match_table); -- 2.43.0