Hey folks,
This patchset adds Exynos2200 support to the existing eUSB2 phy driver,
as well as USBDRD support for that SoC.
The SoC features the same (as far as I can tell from comparing code)
USBDRD 3.2 4nm block that Exynos2400 has, hence the common denominator.
It consists of a SEC USB link controller, Synopsys eUSB2 and Synopsys
USBDP combophy, which are independent underlying hardware blocks of
the USBDRD controller.
In the vendor kernel, everything is handled in the usbdrd controller
driver, with helpers for underlying hardware block functions outside it.
Clocks and regulators are specified and enabled in one node, which makes
it difficult to separate what clocks and regulators go where without
access to schematics or TRMs. The following gates are defined for USB:
CLK_BLK_HSI0_UID_USB32DRD_IPCLKPORT_I_USBSUBCTL_APB_PCLK
CLK_BLK_HSI0_UID_USB32DRD_IPCLKPORT_I_USBDPPHY_CTRL_PCLK
CLK_BLK_HSI0_UID_USB32DRD_IPCLKPORT_I_USBDPPHY_TCA_APB_CLK
CLK_BLK_HSI0_UID_USB32DRD_IPCLKPORT_I_USBLINK_ACLK
CLK_BLK_HSI0_UID_USB32DRD_IPCLKPORT_I_USB32DRD_REF_CLK_40
CLK_BLK_HSI0_UID_USB32DRD_IPCLKPORT_I_EUSB_CTRL_PCLK
CLK_BLK_HSI0_UID_USB32DRD_IPCLKPORT_I_EUSB_APB_CLK
CLK_BLK_HSI0_UID_AS_APB_EUSBPHY_HSI0_IPCLKPORT_PCLKM
CLK_BLK_HSI0_UID_RSTNSYNC_CLK_HSI0_EUSB_IPCLKPORT_CLK
The vendor kernel specifies 4 regulators, 2 of which are for eUSB
and the other 2 for the repeater. The rest of the PHYs and the dwc3
controller are on a single power domain (hsi0), so they're most likely
sharing power rails.
As Qualcomm is also using the eUSB2 IP, the approach taken here is to
rename the driver so that it can be used by other SoC vendors as well
while keeping compatibles SoC-vendor prefixed (different vendors have
different implementations of the IP with different register maps),
add support for exynos2200 in it and implement support for exynos2200
in the existing exynos5-usbdrd driver (with link controller init).
A new USBDP driver will be added later on, so that super-speed can be
configured.
Bindings have been tested:
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -j4 dt_binding_check DT_SCHEMA_FILES="Documentation/devicetree/bindings/phy/snps,eusb2-phy.yaml"
CHKDT ./Documentation/devicetree/bindings
LINT ./Documentation/devicetree/bindings
DTC [C] Documentation/devicetree/bindings/phy/snps,eusb2-phy.example.dtb
Best regards,
Ivaylo
Changes in v3:
USBCON changes:
- drop the driver and introduce it all in existing exynos5-usbdrd driver
EUSB2 changes:
- split changes into multiple commits with clear diff
- add a commit to do table-based lookup for refclk
- clean up here and there
- correct the cover letter according to my new knowledge of how the
hardware functions
- change commit message of the optional repeater patch
Changes in v2:
USBCON changes:
- drop unused header includes
- sanitize the binding
- proper init and exit power management
- shorten some variables
- unrelax reads and writes
- update commit description
- remodel to take other phys
- drop specified regulators as these are for the repeater
- make the kconfig description better
- general cleanup
EUSB2 changes:
- merge the previous separate driver into the qualcomm one
- drop the previous model of taking usbcon phandle
Ivaylo Ivanov (10):
dt-bindings: phy: add exynos2200 eusb2 phy support
dt-bindings: phy: samsung,usb3-drd-phy: add exynos2200 support
phy: move phy-qcom-snps-eusb2 out of its vendor sub-directory
phy: phy-snps-eusb2: refactor constructs names
phy: phy-snps-eusb2: split phy init code
phy: phy-snps-eusb2: make repeater optional
phy: phy-snps-eusb2: make reset control optional
phy: phy-snps-eusb2: refactor reference clock init
phy: phy-snps-eusb2: add support for exynos2200
phy: exynos5-usbdrd: support Exynos USBDRD 3.2 4nm controller
.../bindings/phy/samsung,usb3-drd-phy.yaml | 38 +-
...nps-eusb2-phy.yaml => snps,eusb2-phy.yaml} | 62 +-
drivers/phy/Kconfig | 8 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-snps-eusb2.c | 629 ++++++++++++++++++
drivers/phy/qualcomm/Kconfig | 9 -
drivers/phy/qualcomm/Makefile | 1 -
drivers/phy/qualcomm/phy-qcom-snps-eusb2.c | 442 ------------
drivers/phy/samsung/phy-exynos5-usbdrd.c | 227 ++++++-
include/linux/soc/samsung/exynos-regs-pmu.h | 3 +
10 files changed, 941 insertions(+), 479 deletions(-)
rename Documentation/devicetree/bindings/phy/{qcom,snps-eusb2-phy.yaml => snps,eusb2-phy.yaml} (59%)
create mode 100644 drivers/phy/phy-snps-eusb2.c
delete mode 100644 drivers/phy/qualcomm/phy-qcom-snps-eusb2.c
--
2.43.0
