Hi Krzysztof,
Thanks for your reply.
On 2025/3/21 17:25, Krzysztof Kozlowski wrote:
[ EXTERNAL EMAIL ]
On 21/03/2025 03:23, Xianwei Zhao via B4 Relay wrote:
From: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
When use command 'make ARCH=arm64 dtbs_check W=1' to compile dtb,
a warning message appears.
"Warning (simple_bus_reg): /soc/bus@fe000000/pinctrl:
missing or empty reg/ranges property"
Add the unit address to the pinctrl node to fix it.
Fixes: ce78f679e08c ("arm64: dts: amlogic: a4: add pinctrl node")
Signed-off-by: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
---
arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi | 102 +++++++++++++++-------------
1 file changed, 55 insertions(+), 47 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
index fa80fa365f13..582e0043024b 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
@@ -51,87 +51,52 @@ pwrc: power-controller {
};
&apb {
- gpio_intc: interrupt-controller@4080 {
- compatible = "amlogic,a4-gpio-intc",
- "amlogic,meson-gpio-intc";
- reg = <0x0 0x4080 0x0 0x20>;
- interrupt-controller;
- #interrupt-cells = <2>;
- amlogic,channel-interrupts =
- <10 11 12 13 14 15 16 17 18 19 20 21>;
- };
-
- gpio_ao_intc: interrupt-controller@8e72c {
- compatible = "amlogic,a4-gpio-ao-intc",
- "amlogic,meson-gpio-intc";
- reg = <0x0 0x8e72c 0x0 0x0c>;
- interrupt-controller;
- #interrupt-cells = <2>;
- amlogic,channel-interrupts = <140 141>;
- };
Not related to the change you described in commit msg.
I will add the corresponding description in commit msg.
Best regards,
Krzysztof
