On 21/03/2025 03:23, Xianwei Zhao via B4 Relay wrote:
> From: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
>
> When use command 'make ARCH=arm64 dtbs_check W=1' to compile dtb,
> a warning message appears.
> "Warning (simple_bus_reg): /soc/bus@fe000000/pinctrl:
> missing or empty reg/ranges property"
>
> Add the unit address to the pinctrl node to fix it.
>
> Fixes: ce78f679e08c ("arm64: dts: amlogic: a4: add pinctrl node")
> Signed-off-by: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi | 102 +++++++++++++++-------------
> 1 file changed, 55 insertions(+), 47 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
> index fa80fa365f13..582e0043024b 100644
> --- a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
> @@ -51,87 +51,52 @@ pwrc: power-controller {
> };
>
> &apb {
> - gpio_intc: interrupt-controller@4080 {
> - compatible = "amlogic,a4-gpio-intc",
> - "amlogic,meson-gpio-intc";
> - reg = <0x0 0x4080 0x0 0x20>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - amlogic,channel-interrupts =
> - <10 11 12 13 14 15 16 17 18 19 20 21>;
> - };
> -
> - gpio_ao_intc: interrupt-controller@8e72c {
> - compatible = "amlogic,a4-gpio-ao-intc",
> - "amlogic,meson-gpio-intc";
> - reg = <0x0 0x8e72c 0x0 0x0c>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - amlogic,channel-interrupts = <140 141>;
> - };
Not related to the change you described in commit msg.
Best regards,
Krzysztof
