Hi Jacek, On 2015년 05월 08일 17:33, Jacek Anaszewski wrote: > Hi Ingi, > > On 05/08/2015 05:03 AM, Ingi Kim wrote: >> This patch adds the device tree bindings for ktd2692 flash LEDs. >> Add Optional properties of child node for Flash LED >> >> Signed-off-by: Ingi Kim <ingi2.kim@xxxxxxxxxxx> >> Acked-by: Seung-Woo Kim <sw0312.kim@xxxxxxxxxxx> >> Reviewed-by: Varka Bhadram <varkabhadram@xxxxxxxxx> >> --- >> .../devicetree/bindings/leds/leds-ktd2692.txt | 50 ++++++++++++++++++++++ >> 1 file changed, 50 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt >> >> diff --git a/Documentation/devicetree/bindings/leds/leds-ktd2692.txt b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt >> new file mode 100644 >> index 0000000..cf45492 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt >> @@ -0,0 +1,50 @@ >> +* Kinetic Technologies - KTD2692 Flash LED Driver >> + >> +KTD2692 is the ideal power solution for high-power flash LEDs. >> +It uses ExpressWire single-wire programming for maximum flexibility. >> + >> +The ExpressWire interface through CTRL pin can control LED on/off and >> +enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current, >> +Flash timeout, LVP(low voltage protection). >> + >> +Also, When the AUX pin is pulled high while CTRL pin is high, >> +LED current will be ramped up to the flash-mode current level. >> + >> +Required properties: >> +- compatible: "kinetic,ktd2692" > > How about: > > compatible : Should be "kinetic,ktd2692". > > Pleas put space between the property name and a colon consequently. > >> +- ctrl-gpio : gpio pin in order control CTRL pin >> +- aux-gpio : gpio pin in order control AUX pin > > Documentation/devicetree/bindings/gpio/gpio.txt states: > > "GPIO properties should be named "[<name>-]gpios". > > Please adhere to this. Also please begin description after colon > with a capital letter and put a dot at the end of sentence, e.g.: > > ctrl-gpios : Specifier of the GPIO connected to CTRL pin. > aux-gpio : Specifier of the GPIO connected to AUX pin. > I should have read binding test strictly. I'll fix it >> +Optional properties: >> +- vin-supply : "vin" LED supply (2.7V to 5.5V) >> + See Documentation/devicetree/bindings/regulator/regulator.txt >> + >> +A discrete LED element connected to the device must be represented by a child >> +node - see Documentation/devicetree/bindings/leds/common.txt. >> + >> +Required properties for flash LED child nodes: >> + See Documentation/devicetree/bindings/leds/common.txt >> +- led-max-microamp : Minimum Threshold for Timer protection >> + is defined internally (Maximum 300mA) >> +- flash-max-microamp : Flash LED maximum current >> + Formula : I(mA) = 15000 / Rset >> +- flash-max-timeout-us : Flash LED maximum timeout >> + >> +Optional properties for flash LED child nodes: >> +- label : see Documentation/devicetree/bindings/leds/common.txt >> + >> +Example: >> + >> +ktd2692 { >> + compatible = "kinetic,ktd2692"; >> + ctrl-gpio = <&gpc0 1 0>; >> + aux-gpio = <&gpc0 2 0>; > > ctrl-gpios = <&gpc0 1 0>; > aux-gpios = <&gpc0 2 0>; > Check it! >> + vin-supply = <&vbat>; >> + >> + flash-led { >> + label = "ktd2692-flash"; >> + led-max-microamp = <300000>; >> + flash-max-microamp = <1500000>; >> + flash-max-timeout-us = <1835000>; >> + }; >> +}; >> > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html