Re: [PATCH v2 1/2] arm64: dts: rockchip: Correct gmac phy address

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Subject: Re: [PATCH v2 1/2] arm64: dts: rockchip: Correct gmac phy address
From: Andrew Lunn <andrew@xxxxxxx>
Date: Thu, 20 Mar 2025 13:52:36 +0100
Cc: Heiko Stuebner <heiko@xxxxxxxxx>, Rob Herring <robh@xxxxxxxxxx>, Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>, Conor Dooley <conor+dt@xxxxxxxxxx>, devicetree@xxxxxxxxxxxxxxx, linux-arm-kernel@xxxxxxxxxxxxxxxxxxx, linux-rockchip@xxxxxxxxxxxxxxxxxxx
In-reply-to: <6b8ef7e37e646f4cd399ceb2f46017644d76da9d.1742331667.git.ukleinek@kernel.org>

On Tue, Mar 18, 2025 at 10:08:45PM +0100, Uwe Kleine-König wrote:
> The Motorcomm Phy can be talked to on mdio broadcast address 0, but the
> actuall address is 3. Adapt the reg property and node name accordingly.
> 
> Signed-off-by: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>

Reviewed-by: Andrew Lunn <andrew@xxxxxxx>

    Andrew

References:
- [PATCH v2 0/2] arm64: dts: rockchip: Improve gmac phy setup for QNAP-TS433
  - From: Uwe Kleine-König
- [PATCH v2 1/2] arm64: dts: rockchip: Correct gmac phy address
  - From: Uwe Kleine-König

Prev by Date: Re: [PATCH v2 2/2] arm64: dts: rockchip: Add gmac phy reset GPIO
Next by Date: [PATCH v2 01/11] clk: en7523: convert driver to regmap API
Previous by thread: [PATCH v2 1/2] arm64: dts: rockchip: Correct gmac phy address
Next by thread: [PATCH] arm64: dts: rockchip: Improve gmac phy setup for QNAP-TS433
Index(es):
- Date
- Thread

[Index of Archives] [Device Tree Compilter] [Device Tree Spec] [Linux Driver Backports] [Video for Linux] [Linux USB Devel] [Linux PCI Devel] [Linux Audio Users] [Linux Kernel] [Linux SCSI] [XFree86] [Yosemite Backpacking]

Powered by Linux