[PATCH v2 0/2] arm64: dts: rockchip: Improve gmac phy setup for QNAP-TS433

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

as suggested by Heiko I split the patch to improve the phy setup of the
gmac ethernet into two patches. The initial patch can be found at
https://lore.kernel.org/linux-arm-kernel/20250318184550.47642-2-uwe@xxxxxxxxxxxxxxxxx/ .

Heiko also suggested to add Fixes tags. I'm unsure these are justified
because while these patches are an improvement the old devicetree is
working fine. I suggest Heiko to add the tags if he feels strongly
enough about these.

Best regards
Uwe

Uwe Kleine-König (2):
  arm64: dts: rockchip: Correct gmac phy address
  arm64: dts: rockchip: Add gmac phy reset GPIO

 .../arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b
-- 
2.47.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux