Enable the HDMI 4K port located next to the USB Type-C power port. It's driven by DP0 on the RK3588S via a RA620 DP to HDMI converter. Note that ROCKCHIP_VOP2_EP_DP0 is defined as 10 in dt-binding header, but it will trigger a dtc warning like "graph node unit address error, expected "a"" if we use it directly after endpoint, so we use "a" instead here. Signed-off-by: FUKAUMI Naoki <naoki@xxxxxxxxx> --- This patch depends https://patchwork.kernel.org/project/linux-rockchip/cover/20250312104214.525242-1-andyshrk@xxxxxxx/ --- .../boot/dts/rockchip/rk3588s-rock-5a.dts | 36 +++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts index f894742b1ebe..6173b0ccb639 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts @@ -36,6 +36,17 @@ chosen { stdout-path = "serial2:1500000n8"; }; + dp-con { + compatible = "dp-connector"; + type = "full-size"; // HDMI Type-D via RA620 + + port { + dp_con_in: endpoint { + remote-endpoint = <&dp0_out_con>; + }; + }; + }; + hdmi0-con { compatible = "hdmi-connector"; type = "d"; @@ -178,6 +189,24 @@ &cpu_l3 { cpu-supply = <&vdd_cpu_lit_s0>; }; +&dp0 { + status = "okay"; + pinctrl-0 = <&dp0m1_pins>; + pinctrl-names = "default"; +}; + +&dp0_in { + dp0_in_vp2: endpoint { + remote-endpoint = <&vp2_out_dp0>; + }; +}; + +&dp0_out { + dp0_out_con: endpoint { + remote-endpoint = <&dp_con_in>; + }; +}; + &gpu { mali-supply = <&vdd_gpu_s0>; status = "okay"; @@ -849,3 +878,10 @@ vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { remote-endpoint = <&hdmi0_in_vp0>; }; }; + +&vp2 { + vp2_out_dp0: endpoint@a { + reg = <ROCKCHIP_VOP2_EP_DP0>; + remote-endpoint = <&dp0_in_vp2>; + }; +}; -- 2.43.0
