Hi Krzysztof,
Thanks for the review!
> -----Original Message-----
> From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> Sent: Monday, March 17, 2025 10:29 AM
> To: John Madieu <john.madieu.xa@xxxxxxxxxxxxxx>
> Subject: Re: [PATCH v3 2/6] dt-bindings: thermal: r9a09g047-tsu: Document
> the TSU unit
>
> On Sat, Mar 15, 2025 at 09:12:12AM +0100, John Madieu wrote:
> > The Renesas RZ/G3E SoC includes a Thermal Sensor Unit (TSU) block
> > designed to measure the junction temperature. The device provides
> > real-time temperature measurements for thermal management, utilizing a
> > single dedicated channel (channel 1) for temperature sensing.
>
> Please wrap commit message according to Linux coding style / submission
> process (neither too early nor over the limit):
Will be fixed in v4.
>
> Please run scripts/checkpatch.pl and fix reported warnings. After that,
> run also 'scripts/checkpatch.pl --strict' and (probably) fix more
> warnings. Some warnings can be ignored, especially from --strict run, but
> the code here looks like it needs a fix. Feel free to get in touch if the
> warning is not clear.
Noted. Thanks!
>
> >
> > Signed-off-by: John Madieu <john.madieu.xa@xxxxxxxxxxxxxx>
> > ---
> > v1 -> v2:
> > * Fix reg property specifier to get rid of yamlint warnings
> > * Fix IRQ name to reflect TSU expectations
>
> ...
>
> > + interrupts:
> > + description: |
> > + Interrupt specifiers for the TSU:
> > + - S12TSUADI1: Conversion complete interrupt signal (pulse)
> > + - S12TSUADCMPI1: Comparison result interrupt signal (level)
>
> Same problems as before - you need to list and describe items to have
> constraints. Otherwise why 5 interrupts are allowed but only two
> interrupt-names (test this)?
>
> There is no syntax like above in any other bindings. If you found such,
> please share the filename so we can fix it.
Will fix it in v4.
>
> > +
> > + interrupt-names:
> > + items:
> > + - const: adi
> > + - const: adcmpi
> > +
> > + "#thermal-sensor-cells":
> > + const: 0
> > +
> > + renesas,tsu-calibration-sys:
> > + $ref: /schemas/types.yaml#/definitions/phandle
> > + description: |
> > + Phandle to the system controller (sys) that contains the TSU
> > + calibration values used for temperature calculations.
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - clocks
> > + - resets
> > + - power-domains
> > + - interrupts
> > + - interrupt-names
> > + - "#thermal-sensor-cells"
> > + - renesas,tsu-calibration-sys
> > +
> > + thermal-zones {
>
> Drop the node, no need to show how to use provider binding.
Noted. Thanks!
>
> Best regards,
> Krzysztof
Regards,
John
