On Thu, Mar 13, 2025 at 02:57:44PM +0200, florin.leotescu@xxxxxxxxxxx wrote: > From: Florin Leotescu <florin.leotescu@xxxxxxx> > > Introduce yaml schema for Microchip emc2305 pwm fan controller. > > Signed-off-by: Florin Leotescu <florin.leotescu@xxxxxxx> > --- > .../bindings/hwmon/microchip,emc2305.yaml | 104 ++++++++++++++++++ > 1 file changed, 104 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/microchip,emc2305.yaml > > diff --git a/Documentation/devicetree/bindings/hwmon/microchip,emc2305.yaml b/Documentation/devicetree/bindings/hwmon/microchip,emc2305.yaml > new file mode 100644 > index 000000000000..3107fcafcf6a > --- /dev/null > +++ b/Documentation/devicetree/bindings/hwmon/microchip,emc2305.yaml > @@ -0,0 +1,104 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > + > +$id: http://devicetree.org/schemas/hwmon/microchip,emc2305.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Microchip EMC2305 SMBus compliant PWM fan controller > + > +maintainers: > + - Michael Shych <michaelsh@xxxxxxxxxx> > + > +description: > + Microchip EMC2301/2/3/5 pwm controller which supports > + up to five programmable fan control circuits. > + > +properties: > + compatible: > + oneOf: > + - enum: > + - microchip,emc2305 > + - items: > + - enum: > + - microchip,emc2303 > + - microchip,emc2302 > + - microchip,emc2301 > + - const: microchip,emc2305 > + > + reg: > + maxItems: 1 > + > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > + '#pwm-cells': > + const: 2 > + > +patternProperties: > + "^fan@[0-4]$": > + $ref: fan-common.yaml# > + unevaluatedProperties: false > + properties: > + reg: > + description: > + The fan number. > + > + required: > + - reg > + - pwms > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + fan_controller: fan-controller@2f { > + compatible = "microchip,emc2305"; > + reg = <0x2f>; > + #address-cells = <1>; > + #size-cells = <0>; > + #pwm-cells = <2>; > + > + fan@0 { > + #cooling-cells = <2>; > + reg = <0x0>; > + pwms = <&fan_controller 1 1>; > + }; > + > + fan@1 { > + #cooling-cells = <2>; > + reg = <0x1>; > + pwms = <&fan_controller 1 1>; > + }; > + > + fan@2 { > + #cooling-cells = <2>; > + reg = <0x2>; > + pwms = <&fan_controller 1 1>; > + }; > + > + fan@3 { > + #cooling-cells = <2>; > + reg = <0x3>; > + pwms = <&fan_controller 1 1>; > + }; > + > + fan@4 { > + #cooling-cells = <2>; > + reg = <0x4>; > + pwms = <&fan_controller 1 1>; > + }; I think one child node should be enough for example. Reviewed-by: Frank Li <Frank.Li@xxxxxxx> > + }; > + }; > +... > -- > 2.34.1 >
