Hi,
Dne sreda, 12. marec 2025 ob 20:36:28 Srednjeevropski standardni čas je Michael Klein napisal(a):
> The Bananapi M1 has three LEDs connected to the RTL8211E ethernet PHY.
> Add the corresponding nodes to the device tree.
>
> Signed-off-by: Michael Klein <michael@xxxxxxxxxxxx>
This is patch 2/2. Which one is patch 1/2? I got only one.
Best regards,
Jernej
> ---
> .../boot/dts/allwinner/sun7i-a20-bananapi.dts | 27 +++++++++++++++++++
> 1 file changed, 27 insertions(+)
>
> diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
> index 46ecf9db2324..4976453ed192 100644
> --- a/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
> +++ b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
> @@ -48,6 +48,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/leds/common.h>
>
> / {
> model = "LeMaker Banana Pi";
> @@ -169,6 +170,32 @@ &ir0 {
> &gmac_mdio {
> phy1: ethernet-phy@1 {
> reg = <1>;
> +
> + leds {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + led@0 {
> + reg = <0>;
> + color = <LED_COLOR_ID_GREEN>;
> + default-state = "keep";
> + linux,default-trigger = "netdev";
> + };
> +
> + led@1 {
> + reg = <1>;
> + color = <LED_COLOR_ID_AMBER>;
> + default-state = "keep";
> + linux,default-trigger = "netdev";
> + };
> +
> + led@2 {
> + reg = <2>;
> + color = <LED_COLOR_ID_BLUE>;
> + default-state = "keep";
> + linux,default-trigger = "netdev";
> + };
> + };
> };
> };
>
>
