On Tue, 2025-03-11 at 10:47 +0100, AngeloGioacchino Del Regno wrote: > External email : Please do not click links or open attachments until > you have verified the sender or the content. > > > Il 07/03/25 07:59, Axe Yang (杨磊) ha scritto: > > On Thu, 2025-03-06 at 10:19 +0100, AngeloGioacchino Del Regno > > wrote: > > > External email : Please do not click links or open attachments > > > until > > > you have verified the sender or the content. > > > > > > > > > Il 06/03/25 09:48, Axe Yang ha scritto: > > > > Add 'mediatek,disable-single-burst' setting. This property can > > > > be > > > > used to switch bus burst type, from single burst to INCR, which > > > > is > > > > determined by the bus type within the IP. Some versions of the > > > > IP > > > > are using AXI bus, thus this switch is necessary as 'single' is > > > > not > > > > the burst type supported by the bus. > > > > > > > > Signed-off-by: Axe Yang <axe.yang@xxxxxxxxxxxx> > > > > > > I am mostly sure that this is not something to put in devicetree, > > > but > > > as > > > platform data for specific SoC(s), as much as I'm mostly sure > > > that > > > all of > > > the instances of the MSDC IP in one SoC will be *all* using > > > either > > > single > > > or INCR. > > > > No, actually MSDC IPs in one SoC are using different versions. > > Usually MSDC1 (index from 1) is used as eMMC host, the left hosts > > are > > used as SD/SDIO hosts. They have similar designs, but there are > > still > > difference. > > > > > > > > So, I think I know the answer but I'll still ask just to be > > > extremely > > > sure: > > > > > > is there any MediaTek SoC that has different IP versions for > > > different MSDC > > > instances, and that hence require single burst on one instance > > > and > > > INCR on > > > another instance? > > > > Yes. Actually every SoC has different IP versions for eMMC and > > SD/SDIO > > host as I said. > > e.g. For MT8168, signel burst bit should be set to 1 for eMMC Host, > > but > > 0 for SD/SDIO Host. > > > > > > > > And if there is - is there a pattern? Is it always SDIO requiring > > > INCR or > > > always eMMC/SD requiring it? > > > > > > > > > > No, there is no pattern. Both eMMC and SD/SDIO hosts need to be > > configured base on IP version. There is no binding relationship > > between > > eMMC/SD/SDIO and the burst type. eMMC burst type might be INCR or > > single, same as SD/SDIO. > > > > Okay but if there are different IP versions, and AXI/AHB is > determined > by the IP version, why aren't you parsing the MAIN_VER/ECO_VER > registers of > the MSDC IP to check whether to use INCR or SINGLE? To address your concerns, I had further discussions with the designer. Their response was that the bus type and IP version are not bound together. This contradicts my previous statements, and I apologize for that. According to the designer's feedback, I must say that the single burst setting is indeed tied to the IC, but the granularity is such that it needs to be set individually for each host. Given the large number of ICs Mediatek currently has, adding burst type information for each host to the driver's compatible structure would mean adding hundreds(maybe thousands :() of lines to the driver for the compatible structures for *all previous SoCs* (currently there are only 13 compatible structures, and they can be reuse by new SoC). This approach seems very cumbersome. So I still believe that placing this setting in the DTS is a more appropriate approach. Regards, Axe > > Cheers, > Angelo > > > > > Regards, > > Axe > > > > > > > > > > > --- > > > > Documentation/devicetree/bindings/mmc/mtk-sd.yaml | 8 > > > > ++++++++ > > > > 1 file changed, 8 insertions(+) > > > > > > > > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml > > > > b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml > > > > index 0debccbd6519..6076aff0a689 100644 > > > > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml > > > > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml > > > > @@ -100,6 +100,14 @@ properties: > > > > minimum: 0 > > > > maximum: 0xffffffff > > > > > > > > + mediatek,disable-single-burst: > > > > + $ref: /schemas/types.yaml#/definitions/flag > > > > + description: > > > > + Burst type setting. For some versions of the IP that do > > > > not > > > > use > > > > + AHB bus, the burst type need to be switched to INCR. > > > > + If present, use INCR burst type. > > > > + If not present, use single burst type. > > > > + > > > > mediatek,hs200-cmd-int-delay: > > > > $ref: /schemas/types.yaml#/definitions/uint32 > > > > description: > > > > > > > > > > >
