Hi All,
> -----Original Message-----
> From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> Sent: 20 February 2025 11:41
> Subject: RE: [PATCH v2 0/2] Add support for RZ/G3E WDT
>
> Hi all,
>
> > -----Original Message-----
> > From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > Sent: 26 January 2025 13:26
> > Subject: [PATCH v2 0/2] Add support for RZ/G3E WDT
> >
> > The RZ/G3E WDT IP is similar to RZ/V2H WDT. WDT0 can be used for CM33
> > cold reset, system reset and asserting WDTUDFCM pin where as WDT1 can
> > be used for CA55 cold reset, system reset and asserting WDTUDFCA pin. Other 2 watchdogs can be used
> for system reset. So define WDT{1..3} in SoC dtsi.
> >
> > v1->v2:
> > * Dropped patch#2, #4 and #5 as it is queued for renesas_clk and
> > renesas_devel.
> > * Collected tags for patch#1.
> > * Updated commit header and description for patch#2.
> > * Replaced ARCH_R9A09G047->ARCH_RENESAS as both RZ/V2H and RZ/G3E belongs
> > to ARCH_RENESAS family.
> >
> > Biju Das (2):
> > dt-bindings: watchdog: renesas,wdt: Document RZ/G3E support
> > watchdog: Enable RZV2HWDT driver depend on ARCH_RENESAS
> >
> > .../devicetree/bindings/watchdog/renesas,wdt.yaml | 4 ++++
> > drivers/watchdog/Kconfig | 7 ++++---
> > 2 files changed, 8 insertions(+), 3 deletions(-)
> >
>
Gentle ping. Are we happy with this patches?
Cheers,
Biju
