Hi Wadim
[...]
On 28/02/25 15:48, Wadim Egorov wrote:
> @@ -168,6 +174,7 @@ &cpsw3g {
> status = "okay";
> pinctrl-names = "default";
> pinctrl-0 = <&main_rgmii1_pins_default>;
> + bootph-all;
One of the child nodes have bootph-all, so drop this from the parent.
BTW don't you need main_pktdma to have bootph-all to go along this for
ETH boot support?
> };
>
> &cpsw_port1 {
> @@ -182,6 +189,7 @@ &cpsw3g_mdio {
> cpsw3g_phy1: ethernet-phy@1 {
> compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
> reg = <1>;
> + bootph-all;
> ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
> ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
> ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> @@ -196,6 +204,7 @@ &main_i2c0 {
> pinctrl-names = "default";
> pinctrl-0 = <&main_i2c0_pins_default>;
> clock-frequency = <400000>;
> + bootph-all;
> status = "okay";
>
> pmic@30 {
> @@ -318,6 +327,7 @@ serial_flash: flash@0 {
> cdns,tchsh-ns = <60>;
> cdns,tslch-ns = <60>;
> cdns,read-delay = <0>;
> + bootph-all;
> };
> };
>
> @@ -326,5 +336,6 @@ &sdhci0 {
> pinctrl-0 = <&main_mmc0_pins_default>;
> disable-wp;
> non-removable;
> + bootph-all;
> status = "okay";
> };
> -- 2.34.1
--
Regards
Vignesh
https://ti.com/opensource
