On Fri, Feb 28, 2025 at 10:46 AM Eddie James <eajames@xxxxxxxxxxxxx> wrote: > > > On 2/24/25 22:34, Andrew Jeffery wrote: > > On Fri, 2025-02-21 at 12:11 -0600, Rob Herring (Arm) wrote: > >> On Thu, 20 Feb 2025 14:59:45 -0600, Eddie James wrote: > >>> The Balcones system is similar to Bonnell but with a POWER11 processor. > >>> > >>> Changes since v1: > >>> - Add all the ucd9000 driver supported compatible strings > >>> - Fix node ordering in Balcones device tree > >>> - Improve commit message to explain addition of ibm-power11-dual.dtsi > >>> > >>> Eddie James (3): > >>> dt-bindings: arm: aspeed: add IBM Balcones board > >>> dt-bindings: hwmon: ucd90320: Add additional compatible strings > >>> ARM: dts: aspeed: Add Balcones system > >>> > >>> .../bindings/arm/aspeed/aspeed.yaml | 1 + > >>> .../bindings/hwmon/pmbus/ti,ucd90320.yaml | 6 + > >>> arch/arm/boot/dts/aspeed/Makefile | 1 + > >>> .../dts/aspeed/aspeed-bmc-ibm-balcones.dts | 594 +++++++++++++ > >>> .../arm/boot/dts/aspeed/ibm-power11-dual.dtsi | 779 ++++++++++++++++++ > >>> .../arm/boot/dts/aspeed/ibm-power11-quad.dtsi | 769 +---------------- > >>> 6 files changed, 1383 insertions(+), 767 deletions(-) > >>> create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts > >>> create mode 100644 arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi > >>> > >>> -- > >>> 2.43.5 > >>> > >>> > >>> > >> > >> My bot found new DTB warnings on the .dts files added or changed in this > >> series. > >> > > ... > > > >> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: gpio@1e780000: 'usb-power-hog' does not match any of the regexes: 'pinctrl-[0-9]+' > >> from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml# > > Ah, can you address this one? > > > >> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/bus@1e78a000/i2c@400/pwm@53: failed to match any schema with compatible: ['maxim,max31785a'] > >> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: pressure-sensor@76: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' > >> from schema $id: http://devicetree.org/schemas/trivial-devices.yaml# > > And these also? > > > > The rest looked like the usual noise. > > > Well, all of these errors are also present in Blueridge. I would need to > write a new binding for dps310, move max31785 to yaml format, and I'm > not sure how to fix the gpio hog one. I don't see that error when I run > CHECK_DTBS myself... any suggestions? I think the hog one got fixed recently. The tests run on top of whatever b4 picks for the base or linux-next if it can't figure out the base. So that might be the difference. Rob
