Add the reset controller node as a sub-node to the system controller
node.
Signed-off-by: Wilson Ding <dingwei@xxxxxxxxxxx>
---
arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
index 161beec0b6b0..c27058d1534e 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
@@ -226,6 +226,8 @@ CP11X_LABEL(rtc): rtc@284000 {
CP11X_LABEL(syscon0): system-controller@440000 {
compatible = "syscon", "simple-mfd";
reg = <0x440000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
CP11X_LABEL(clk): clock {
compatible = "marvell,cp110-clock";
@@ -273,6 +275,12 @@ CP11X_LABEL(gpio2): gpio@140 {
<&CP11X_LABEL(clk) 1 17>;
status = "disabled";
};
+
+ CP11X_LABEL(swrst): reset-controller@268 {
+ compatible = "marvell,armada8k-reset";
+ reg = <0x268 0x4>;
+ #reset-cells = <1>;
+ };
};
CP11X_LABEL(syscon1): system-controller@400000 {
--
2.43.0
