The third dma cell is used for priority information not to encode
something else. The NXP downstream kernel use the third cell to encode
more information:
- Bit31: sw_done feature enable/disable
- Bit15~Bit8: selector
- Bit7~Bit0: priority level
but this was never mainlined. Therefore drop the further information and
just specify the priority which is 0.
FTR: The sw_done feature was mainlined without making use of the
devicetree.
Fixes: cca69ef6eba5 ("arm64: dts: imx8mn: Add support for micfil")
Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index a5f9cfb46e5d..8ab4af78acb5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -369,7 +369,7 @@ micfil: audio-controller@30080000 {
<&clk IMX8MN_CLK_EXT3>;
clock-names = "ipg_clk", "ipg_clk_app",
"pll8k", "pll11k", "clkext3";
- dmas = <&sdma2 24 25 0x80000000>;
+ dmas = <&sdma2 24 25 0>;
dma-names = "rx";
#sound-dai-cells = <0>;
status = "disabled";
--
2.39.5
