The third dma cell is used for priority information not to encode
something else. The NXP downstream kernel use the third cell to encode
more information:
- Bit31: sw_done feature enable/disable
- Bit15~Bit8: selector
- Bit7~Bit0: priority level
but this was never mainlined. Therefore drop the further information and
just specify the priority which is 0.
FTR: The sw_done feature was mainlined without making use of the
devicetree.
Fixes: 5c6d04e48197 ("arm64: dts: imx8mp: Add micfil node")
Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index e0d3b8cba221..af51f1caa71a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -1544,7 +1544,7 @@ micfil: audio-controller@30ca0000 {
<&clk IMX8MP_CLK_EXT3>;
clock-names = "ipg_clk", "ipg_clk_app",
"pll8k", "pll11k", "clkext3";
- dmas = <&sdma2 24 25 0x80000000>;
+ dmas = <&sdma2 24 25 0>;
dma-names = "rx";
status = "disabled";
};
--
2.39.5
