On Mon, 24 Feb 2025 at 10:00, Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:
> On Sun, 23 Feb 2025 at 19:09, Laurent Pinchart
> <laurent.pinchart@xxxxxxxxxxxxxxxx> wrote:
> > On Fri, Feb 21, 2025 at 04:55:15PM +0100, Tommaso Merciai wrote:
> > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > >
> > > The MIPI CSI-2 block on the Renesas RZ/V2H(P) SoC is similar to the one
> > > found on the Renesas RZ/G2L SoC, with the following differences:
> > > - A different D-PHY
> > > - Additional registers for the MIPI CSI-2 link
> > > - Only two clocks
> > >
> > > Add a new compatible string, `renesas,r9a09g057-csi2`, for the RZ/V2H(P)
> > > SoC.
> > >
> > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > > Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@xxxxxxxxxxxxxx>
>
> > > --- a/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> > > +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
>
> > > @@ -48,7 +58,7 @@ properties:
> > > resets:
> > > items:
> > > - description: CRU_PRESETN reset terminal
> > > - - description: CRU_CMN_RSTB reset terminal
> > > + - description: CRU_CMN_RSTB reset terminal or D-PHY reset
> >
> > I'd mention which SoCs these apply to:
> >
> > - description:
> > CRU_CMN_RSTB reset terminal (all but RZ/V2H) or D-PHY reset (RZ/V2H)
>
> Note that RZ/G3E uses the same naming, so be prepared for more churn...
>
> However, I am confused...
>
> 1. According to Section 35.3.1 "Starting Reception for the MIPI CSI-2
> Input" (RZ/G2L Rev. 1.45) CPG_RST_CRU.CRU_CMN_RSTB _is_ the
> D-PHY reset.
This is still valid.
> 2. The CRU has three (not two) resets on all:
> - CRU_PRESETN,
> - CRU_ARESETN,
> - CRU_CMN_RSTB (RZ/G2L, RZ/V2L, and RZ/G2UL) or
> CRU_S_RESETN (RZ/V2H and RZ/G3E).
Sorry, I missed this binding is about the CSI-2, not the CRU.
So the third interrupt is really about the CSI-2 PHY.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
