Add usb_cdns3 and usb0_pins configuration to support super speed USB
device on the FML13V01 board.
Signed-off-by: Sandie Cao <sandie.cao@xxxxxxxxxxxxxxxx>
---
Changes in v2:
- Remove space to pass checkpatch.pl.
- Add usb0_pins and pass test on board.
.../jh7110-deepcomputing-fml13v01.dts | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts b/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts
index 8d9ce8b69a71..f2857d021d68 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts
+++ b/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts
@@ -43,9 +43,28 @@ GPOEN_DISABLE,
slew-rate = <0>;
};
};
+
+ usb0_pins: usb0-0 {
+ vbus-pins {
+ pinmux = <GPIOMUX(25, GPOUT_SYS_USB_DRIVE_VBUS,
+ GPOEN_ENABLE,
+ GPI_NONE)>;
+ bias-disable;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
};
&usb0 {
dr_mode = "host";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_pins>;
status = "okay";
};
+
+&usb_cdns3 {
+ phys = <&usbphy0>, <&pciephy0>;
+ phy-names = "cdns3,usb2-phy", "cdns3,usb3-phy";
+};
base-commit: 38818f7c9c179351334b1faffc4d40bd28cc9c72
--
2.34.1
