From: "J. Neuschäfer" <j.ne@xxxxxxxxxx> Add a binding for the "Gianfar" ethernet controller, also known as TSEC/eTSEC. Signed-off-by: J. Neuschäfer <j.ne@xxxxxxxxxx> --- .../devicetree/bindings/net/fsl,gianfar.yaml | 242 +++++++++++++++++++++ .../devicetree/bindings/net/fsl-tsec-phy.txt | 39 +--- 2 files changed, 243 insertions(+), 38 deletions(-) diff --git a/Documentation/devicetree/bindings/net/fsl,gianfar.yaml b/Documentation/devicetree/bindings/net/fsl,gianfar.yaml new file mode 100644 index 0000000000000000000000000000000000000000..dc75ceb5dc6fdee8765bb17273f394d01cce0710 --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl,gianfar.yaml @@ -0,0 +1,242 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/fsl,gianfar.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Three-Speed Ethernet Controller (TSEC), "Gianfar" + +maintainers: + - J. Neuschäfer <j.ne@xxxxxxxxxx> + +properties: + compatible: + enum: + - gianfar + - fsl,etsec2 + + device_type: + const: network + + model: + enum: + - FEC + - TSEC + - eTSEC + + reg: + maxItems: 1 + + ranges: true + + "#address-cells": true + + "#size-cells": true + + cell-index: + $ref: /schemas/types.yaml#/definitions/uint32 + + interrupts: + maxItems: 3 + + dma-coherent: + type: boolean + + fsl,magic-packet: + $ref: /schemas/types.yaml#/definitions/flag + description: + If present, indicates that the hardware supports waking up via magic packet. + + fsl,wake-on-filer: + type: boolean + description: + If present, indicates that the hardware supports waking up by Filer + General Purpose Interrupt (FGPI) asserted on the Rx int line. This is + an advanced power management capability allowing certain packet types + (user) defined by filer rules to wake up the system. + + bd-stash: + type: boolean + description: + If present, indicates that the hardware supports stashing buffer + descriptors in the L2. + + rx-stash-len: + type: boolean + description: + Denotes the number of bytes of a received buffer to stash in the L2. + + tx-stash-len: + type: boolean + description: + Denotes the index of the first byte from the received buffer to stash in + the L2. + + fsl,num_rx_queues: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Number of receive queues + + fsl,num_tx_queues: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Number of transmit queues + + tbi-handle: + $ref: /schemas/types.yaml#/definitions/phandle + description: Reference (phandle) to the TBI node + +required: + - compatible + - model + +patternProperties: + "^mdio@[0-9a-f]+$": + type: object + # TODO: reference to gianfar MDIO binding + +allOf: + - $ref: ethernet-controller.yaml# + + # compatible = "gianfar" requires device_type = "network" + - if: + properties: + compatible: + contains: + const: gianfar + then: + required: + - device_type + + # eTSEC2 controller nodes have "queue group" subnodes and don't need a "reg" + # property. + - if: + properties: + compatible: + contains: + const: fsl,etsec2 + then: + patternProperties: + "^queue-group@[0-9a-f]+$": + type: object + + properties: + "#address-cells": true + + "#size-cells": true + + reg: + maxItems: 1 + + interrupts: + maxItems: 3 + + required: + - reg + - interrupts + + additionalProperties: false + else: + required: + - reg + + # TSEC and eTSEC devices require three interrupts + - if: + properties: + model: + contains: + enum: [ TSEC, eTSEC ] + then: + properties: + interrupts: + items: + - description: Transmit interrupt + - description: Receive interrupt + - description: Error interrupt + + + +unevaluatedProperties: false + +examples: + - | + ethernet@24000 { + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = <29 2>, <30 2>, <34 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + + soc1 { + #address-cells = <1>; + #size-cells = <1>; + + ethernet@24000 { + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 IRQ_TYPE_LEVEL_LOW>, + <33 IRQ_TYPE_LEVEL_LOW>, + <34 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + }; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc2 { + #address-cells = <2>; + #size-cells = <2>; + + ethernet { + compatible = "fsl,etsec2"; + ranges; + device_type = "network"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + model = "eTSEC"; + fsl,magic-packet; + dma-coherent; + + queue-group@2d10000 { + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x2d10000 0x0 0x1000>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + }; + + queue-group@2d14000 { + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x2d14000 0x0 0x1000>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt index 0e55e0af7d6f59cfb571dd3fcff704b7f4c140d2..b18bb4c997ea3a221e599f694d9a28692cbcaa7c 100644 --- a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt +++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt @@ -8,44 +8,7 @@ Refer to Documentation/devicetree/bindings/net/fsl,gianfar-mdio.yaml * Gianfar-compatible ethernet nodes -Properties: - - - device_type : Should be "network" - - model : Model of the device. Can be "TSEC", "eTSEC", or "FEC" - - compatible : Should be "gianfar" - - reg : Offset and length of the register set for the device - - interrupts : For FEC devices, the first interrupt is the device's - interrupt. For TSEC and eTSEC devices, the first interrupt is - transmit, the second is receive, and the third is error. - - phy-handle : See ethernet.txt file in the same directory. - - fixed-link : See fixed-link.txt in the same directory. - - phy-connection-type : See ethernet.txt file in the same directory. - This property is only really needed if the connection is of type - "rgmii-id", as all other connection types are detected by hardware. - - fsl,magic-packet : If present, indicates that the hardware supports - waking up via magic packet. - - fsl,wake-on-filer : If present, indicates that the hardware supports - waking up by Filer General Purpose Interrupt (FGPI) asserted on the - Rx int line. This is an advanced power management capability allowing - certain packet types (user) defined by filer rules to wake up the system. - - bd-stash : If present, indicates that the hardware supports stashing - buffer descriptors in the L2. - - rx-stash-len : Denotes the number of bytes of a received buffer to stash - in the L2. - - rx-stash-idx : Denotes the index of the first byte from the received - buffer to stash in the L2. - -Example: - ethernet@24000 { - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - local-mac-address = [ 00 E0 0C 00 73 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - phy-handle = <&phy0> - }; +Refer to Documentation/devicetree/bindings/net/fsl,gianfar.yaml * Gianfar PTP clock nodes -- 2.48.0.rc1.219.gb6b6757d772
