Re: [PATCH v2 15/16] nvmem: microchip-otpc: Enable necessary clocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Alexander,

On 11.02.2025 08:53, Alexander Dahl wrote:
> Without enabling the main rc clock, initializing the packet list leads
> to a read timeout on the first packet, at least on sam9x60.
> 
> According to SAM9X60 datasheet (DS60001579G) section "23.4 Product
> Dependencies" the clock must be enabled for reading and writing.
> 
> Tested on sam9x60-curiosity board.
> 
> Link: https://lore.kernel.org/linux-clk/ec34efc2-2051-4b8a-b5d8-6e2fd5e08c28@xxxxxxxxxxxxx/T/#u
> Signed-off-by: Alexander Dahl <ada@xxxxxxxxxxx>
> ---
> 
> Notes:
>     v2:
>     - Rewrite to enable _all_ clocks defined in dts
> 
>  drivers/nvmem/microchip-otpc.c | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/drivers/nvmem/microchip-otpc.c b/drivers/nvmem/microchip-otpc.c
> index d39f2d57e5f5e..2c524c163b7e2 100644
> --- a/drivers/nvmem/microchip-otpc.c
> +++ b/drivers/nvmem/microchip-otpc.c
> @@ -8,6 +8,7 @@
>   */
>  
>  #include <linux/bitfield.h>
> +#include <linux/clk.h>
>  #include <linux/iopoll.h>
>  #include <linux/module.h>
>  #include <linux/nvmem-provider.h>
> @@ -241,6 +242,7 @@ static struct nvmem_config mchp_nvmem_config = {
>  static int mchp_otpc_probe(struct platform_device *pdev)
>  {
>  	struct nvmem_device *nvmem;
> +	struct clk_bulk_data *clks;
>  	struct mchp_otpc *otpc;
>  	u32 size;
>  	int ret;
> @@ -253,6 +255,11 @@ static int mchp_otpc_probe(struct platform_device *pdev)
>  	if (IS_ERR(otpc->base))
>  		return PTR_ERR(otpc->base);
>  
> +	ret = devm_clk_bulk_get_all_enabled(&pdev->dev, &clks);
> +	if (ret < 0)
> +		return dev_err_probe(&pdev->dev, ret,
> +				     "Error getting clocks!\n");

This fits on a single line.

> +
>  	otpc->dev = &pdev->dev;
>  	ret = mchp_otpc_init_packets_list(otpc, &size);
>  	if (ret)

General remark: please organize your patches as follows:
- dt-bindings patches
- driver patches
- device tree binding patches

Applying this to your series, will result the following order:
- dt bindings for clocks
- driver changes for clocks
- dt-bindings for nvmeme
- driver changes for nvmem
- device tree for clocks
- device tree for nvmem
Thank you,
Claudiu






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux