On Fri, 14 Feb 2025 15:19:46 +0200 Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx> wrote: > Add support for AD485X fully buffered, 8-channel simultaneous sampling, > 16/20-bit, 1 MSPS data acquisition system (DAS) with differential, wide > common-mode range inputs. > > Most of the review comments which make sense in v9 were addressed. Some of them > might have been ommitted, especially those that are a matter of preference. > Since we reached v10, I tried to cover everything that was pointed out until now. Series applied a little speculatively given we don't have a DT tag for the more trivial dt patch. Needed some hand tweaking to apply as this raced with the ad7606 changes in adi-axi-adc. Please check I didn't mess those up. Pushed out as testing for now. Jonathan > > Antoniu Miclaus (9): > iio: backend: add API for interface get > iio: backend: add support for data size set > iio: backend: add API for oversampling > iio: adc: adi-axi-adc: add interface type > dt-bindings: iio: adc: add ad485x axi variant > iio: adc: adi-axi-adc: set data format > iio: adc: adi-axi-adc: add oversampling > dt-bindings: iio: adc: add ad4851 > iio: adc: ad4851: add ad485x driver > > .../bindings/iio/adc/adi,ad4851.yaml | 153 ++ > .../bindings/iio/adc/adi,axi-adc.yaml | 2 + > drivers/iio/adc/Kconfig | 14 + > drivers/iio/adc/Makefile | 1 + > drivers/iio/adc/ad4851.c | 1315 +++++++++++++++++ > drivers/iio/adc/adi-axi-adc.c | 148 +- > drivers/iio/industrialio-backend.c | 60 + > include/linux/iio/backend.h | 19 + > 8 files changed, 1703 insertions(+), 9 deletions(-) > create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad4851.yaml > create mode 100644 drivers/iio/adc/ad4851.c >
