[PATCH 4/6] dt-bindings: thermal: rockchip: document otp thermal trim

[Nicolas Frattaroli <nicolas.frattaroli@xxxxxxxxxxxxx>]

Several Rockchip SoCs, such as the RK3576, can store calibration trim
data for thermal sensors in OTP cells. This capability should be
documented.

Such a rockchip thermal sensor may reference cell handles that store
both a chip-wide trim for all the sensors, as well as cell handles
for each individual sensor channel pointing to that specific sensor's
trim value.

Additionally, the thermal sensor may optionally reference cells which
store the base in terms of degrees celsius and decicelsius that the trim
is relative to.

Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@xxxxxxxxxxxxx>
---
 .../bindings/thermal/rockchip-thermal.yaml         | 44 ++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml b/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml
index 49ceed68c92ce5a32ed8d4f39bd88fd052de0e80..8d27ddefcc64e29f0faab059888805802c948b41 100644
--- a/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml
@@ -40,6 +40,21 @@ properties:
       - const: tsadc
       - const: apb_pclk
 
+  nvmem-cells:
+    items:
+      - description: cell handle of the low byte of the chip fallback trim value
+      - description: cell handle of the high byte of the chip fallback trim value
+      - description: cell handle to where the trim's base temperature is stored
+      - description:
+          cell handle to where the trim's tenths of Celsius base value is stored
+
+  nvmem-cell-names:
+    enum:
+      - trim_l
+      - trim_h
+      - trim_base
+      - trim_base_frac
+
   resets:
     minItems: 1
     maxItems: 3
@@ -51,6 +66,12 @@ properties:
       - const: tsadc
       - const: tsadc-phy
 
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
   "#thermal-sensor-cells":
     const: 1
 
@@ -72,6 +93,29 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
 
+patternProperties:
+  "^([a-z]+)@[0-9]+$":
+    type: object
+    properties:
+      reg:
+        maxItems: 1
+        description: sensor ID, a.k.a. channel number
+
+      nvmem-cells:
+        items:
+          - description: handle of cell containing low byte of calibration data
+          - description: handle of cell containing high byte of calibration data
+
+      nvmem-cell-names:
+        items:
+          - const: trim_l
+          - const: trim_h
+
+    required:
+      - reg
+
+    unevaluatedProperties: false
+
 required:
   - compatible
   - reg

-- 
2.48.1