On Thu, Feb 06, 2025 at 10:03:04PM +0000, Fabrizio Castro wrote:
> Document the Renesas RZ/V2H(P) family of SoCs DMAC block.
> The Renesas RZ/V2H(P) DMAC is very similar to the one found on the
> Renesas RZ/G2L family of SoCs, but there are some differences:
> * It only uses one register area
> * It only uses one clock
> * It only uses one reset
> * Instead of using MID/IRD it uses REQ NO/ACK NO
> * It is connected to the Interrupt Control Unit (ICU)
>
> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@xxxxxxxxxxx>
> ---
> .../bindings/dma/renesas,rz-dmac.yaml | 152 +++++++++++++++---
> 1 file changed, 127 insertions(+), 25 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
> index 82de3b927479..d4dd22432e49 100644
> --- a/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
> +++ b/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
> @@ -11,19 +11,23 @@ maintainers:
>
> properties:
> compatible:
> - items:
> - - enum:
> - - renesas,r7s72100-dmac # RZ/A1H
> - - renesas,r9a07g043-dmac # RZ/G2UL and RZ/Five
> - - renesas,r9a07g044-dmac # RZ/G2{L,LC}
> - - renesas,r9a07g054-dmac # RZ/V2L
> - - renesas,r9a08g045-dmac # RZ/G3S
> - - const: renesas,rz-dmac
> + oneOf:
> + - items:
> + - enum:
> + - renesas,r7s72100-dmac # RZ/A1H
> + - renesas,r9a07g043-dmac # RZ/G2UL and RZ/Five
> + - renesas,r9a07g044-dmac # RZ/G2{L,LC}
> + - renesas,r9a07g054-dmac # RZ/V2L
> + - renesas,r9a08g045-dmac # RZ/G3S
> + - const: renesas,rz-dmac
> +
> + - const: renesas,r9a09g057-dmac # RZ/V2H(P)
>
> reg:
> items:
> - description: Control and channel register block
> - description: DMA extended resource selector block
> + minItems: 1
>
> interrupts:
> maxItems: 17
> @@ -52,6 +56,7 @@ properties:
> items:
> - description: DMA main clock
> - description: DMA register access clock
> + minItems: 1
>
> clock-names:
> items:
> @@ -61,14 +66,22 @@ properties:
> '#dma-cells':
> const: 1
> description:
> - The cell specifies the encoded MID/RID values of the DMAC port
> - connected to the DMA client and the slave channel configuration
> - parameters.
> + For the RZ/A1H, RZ/Five, RZ/G2{L,LC,UL}, RZ/V2L, and RZ/G3S SoCs, the cell
> + specifies the encoded MID/RID values of the DMAC port connected to the
> + DMA client and the slave channel configuration parameters.
> bits[0:9] - Specifies MID/RID value
> bit[10] - Specifies DMA request high enable (HIEN)
> bit[11] - Specifies DMA request detection type (LVL)
> bits[12:14] - Specifies DMAACK output mode (AM)
> bit[15] - Specifies Transfer Mode (TM)
> + For the RZ/V2H(P) SoC the cell specifies the REQ NO, the ACK NO, and the
> + slave channel configuration parameters.
> + bits[0:9] - Specifies the REQ NO
> + bits[10:16] - Specifies the ACK NO
> + bit[17] - Specifies DMA request high enable (HIEN)
> + bit[18] - Specifies DMA request detection type (LVL)
> + bits[19:21] - Specifies DMAACK output mode (AM)
> + bit[22] - Specifies Transfer Mode (TM)
>
> dma-channels:
> const: 16
> @@ -80,12 +93,29 @@ properties:
> items:
> - description: Reset for DMA ARESETN reset terminal
> - description: Reset for DMA RST_ASYNC reset terminal
> + minItems: 1
>
> reset-names:
> items:
> - const: arst
> - const: rst_async
>
> + renesas,icu:
> + description:
> + On the RZ/V2H(P) SoC configures the ICU to which the DMAC is connected to.
> + It must contain the phandle to the ICU, and the index of the DMAC as seen
> + from the ICU (e.g. parameter k from register ICU_DMkSELy).
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + items:
> + - items:
> + - description: phandle to the ICU node.
> + - description: The DMAC index.
> + 4 for DMAC0
> + 0 for DMAC1
> + 1 for DMAC2
> + 2 for DMAC3
> + 3 for DMAC4
> +
> required:
> - compatible
> - reg
> @@ -98,27 +128,62 @@ allOf:
> - $ref: dma-controller.yaml#
>
> - if:
> - not:
> - properties:
> - compatible:
> - contains:
> - enum:
> - - renesas,r7s72100-dmac
> + properties:
> + compatible:
> + contains:
> + const: renesas,r9a09g057-dmac
> then:
> + properties:
> + reg:
> + maxItems: 1
> + clocks:
> + maxItems: 1
> + resets:
> + maxItems: 1
> +
> + clock-names: false
> + reset-names: false
> +
> required:
> - clocks
> - - clock-names
> - power-domains
> + - renesas,icu
> - resets
> - - reset-names
>
> else:
> - properties:
> - clocks: false
> - clock-names: false
> - power-domains: false
> - resets: false
> - reset-names: false
> + if:
Please try to avoid nesting if/then/else. Not sure that's easy or not
here. This diff is hard to read.
> + not:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - renesas,r7s72100-dmac
> + then:
> + properties:
> + reg:
> + minItems: 2
> + clocks:
> + minItems: 2
> + resets:
> + minItems: 2
> +
> + renesas,icu: false
> +
> + required:
> + - clocks
> + - clock-names
> + - power-domains
> + - resets
> + - reset-names
> +
> + else:
> + properties:
> + clocks: false
> + clock-names: false
> + power-domains: false
> + resets: false
> + reset-names: false
> + renesas,icu: false
>
> additionalProperties: false
>
> @@ -164,3 +229,40 @@ examples:
> #dma-cells = <1>;
> dma-channels = <16>;
> };
> +
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/renesas-cpg-mssr.h>
> +
> + dmac0: dma-controller@11400000 {
> + compatible = "renesas,r9a09g057-dmac";
Is this example really different enough from the others to need it? I
would drop it.
Rob
