Himax HX8279 is a Display DriverIC suitable for driving LCD MIPI-DSI panels. Describe this DriverIC and the Startek KD070FHFID078 panel found on newer revisions of the MediaTek Genio 510/700/1200 Evaluation Kits (EVK). Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> --- .../bindings/display/panel/himax,hx8279.yaml | 74 +++++++++++++++++++ 1 file changed, 74 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/himax,hx8279.yaml diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx8279.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx8279.yaml new file mode 100644 index 000000000000..d66191398f50 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/himax,hx8279.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/himax,hx8279.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Himax HX8279/HX8279-D based MIPI-DSI panels + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> + +description: + The Himax HX8279 is a 1803 channel outputs source driver with MIPI + TCON, which generates the horizontal and vertical control timing to + the source and gate drivers. + This DriverIC is most suitable for 1200x1920, 1080x1920, 1200x1600, + and 600x1024 panels and outputs full RGB888 over two or four lanes, + single or dual, MIPI-DSI video interface. + +allOf: + - $ref: panel-common-dual.yaml# + +properties: + compatible: + items: + - enum: + - startek,kd070fhfid078 + - const: himax,hx8279 + + reg: + maxItems: 1 + + iovcc-supply: + description: I/O voltage supply + + vdd-supply: + description: Panel power supply + +required: + - compatible + - reg + - backlight + - reset-gpios + - iovcc-supply + - vdd-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "startek,kd070fhfid078", "himax,hx8279"; + reg = <0>; + backlight = <&backlight>; + enable-gpios = <&pio 25 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 45 GPIO_ACTIVE_HIGH>; + iovcc-supply = <&vreg_lcm_vio>; + vdd-supply = <&vreg_lcm_vdd>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + }; + +... -- 2.48.1
