[PATCH 4/4] riscv: dts: sophgo: add reset configuration for Sophgo CV1800 series SoC

[Inochi Amaoto <inochiama@xxxxxxxxx>]

Add already known reset configuration for existed device.

Signed-off-by: Inochi Amaoto <inochiama@xxxxxxxxx>
---
 arch/riscv/boot/dts/sophgo/cv18xx.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
index 9aa28ade73a4..4fadcb8e4359 100644
--- a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
+++ b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
@@ -170,6 +170,7 @@ i2c0: i2c@4000000 {
 			clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C0>;
 			clock-names = "ref", "pclk";
 			interrupts = <49 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst RST_I2C0>;
 			status = "disabled";
 		};
 
@@ -181,6 +182,7 @@ i2c1: i2c@4010000 {
 			clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C1>;
 			clock-names = "ref", "pclk";
 			interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst RST_I2C1>;
 			status = "disabled";
 		};
 
@@ -192,6 +194,7 @@ i2c2: i2c@4020000 {
 			clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C2>;
 			clock-names = "ref", "pclk";
 			interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst RST_I2C2>;
 			status = "disabled";
 		};
 
@@ -203,6 +206,7 @@ i2c3: i2c@4030000 {
 			clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C3>;
 			clock-names = "ref", "pclk";
 			interrupts = <52 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst RST_I2C3>;
 			status = "disabled";
 		};
 
@@ -214,6 +218,7 @@ i2c4: i2c@4040000 {
 			clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C4>;
 			clock-names = "ref", "pclk";
 			interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst RST_I2C4>;
 			status = "disabled";
 		};
 
@@ -225,6 +230,7 @@ uart0: serial@4140000 {
 			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			resets = <&rst RST_UART0>;
 			status = "disabled";
 		};
 
@@ -236,6 +242,7 @@ uart1: serial@4150000 {
 			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			resets = <&rst RST_UART1>;
 			status = "disabled";
 		};
 
@@ -247,6 +254,7 @@ uart2: serial@4160000 {
 			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			resets = <&rst RST_UART2>;
 			status = "disabled";
 		};
 
@@ -258,6 +266,7 @@ uart3: serial@4170000 {
 			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			resets = <&rst RST_UART3>;
 			status = "disabled";
 		};
 
@@ -269,6 +278,7 @@ spi0: spi@4180000 {
 			clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI0>;
 			clock-names = "ssi_clk", "pclk";
 			interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst RST_SPI0>;
 			status = "disabled";
 		};
 
@@ -280,6 +290,7 @@ spi1: spi@4190000 {
 			clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI1>;
 			clock-names = "ssi_clk", "pclk";
 			interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst RST_SPI1>;
 			status = "disabled";
 		};
 
@@ -291,6 +302,7 @@ spi2: spi@41a0000 {
 			clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI2>;
 			clock-names = "ssi_clk", "pclk";
 			interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst RST_SPI2>;
 			status = "disabled";
 		};
 
@@ -302,6 +314,7 @@ spi3: spi@41b0000 {
 			clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI3>;
 			clock-names = "ssi_clk", "pclk";
 			interrupts = <57 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst RST_SPI3>;
 			status = "disabled";
 		};
 
@@ -313,6 +326,7 @@ uart4: serial@41c0000 {
 			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			resets = <&rst RST_UART4>;
 			status = "disabled";
 		};
 
-- 
2.48.1