[PATCH 0/2] Add bootph-all to SERDES3 for USB DFU Boot on J721E

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

This series is based on linux-next tagged next-20250207.

J721E SoC supports USB DFU Boot via USB0 instance of USB. On both
J721E-EVM - (J721E SoM + J7 Common Processor Board) and
J721E-SK, the USB Type-C interface which is connected to USB0 via
SERDES3 is used for USB DFU boot.

Series adds "bootph-all" tag to the "serdes3_usb_link" device-tree node
which is the USB3 PHY for USB0, thereby enabling USB DFU boot.

Regards,
Siddharth.

Siddharth Vadapalli (2):
  arm64: dts: ti: k3-j721e-common-proc-board: Add boot phase tag to
    SERDES3
  arm64: dts: ti: k3-j721e-sk: Add boot phase tag to SERDES3

 arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 1 +
 arch/arm64/boot/dts/ti/k3-j721e-sk.dts                | 1 +
 2 files changed, 2 insertions(+)

-- 
2.43.0





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux