On Fri, 7 Feb 2025 16:09:16 +0200
Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx> wrote:
> Add support for enabling/disabling oversampling.
>
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
> ---
> no changes in v12.
> drivers/iio/adc/adi-axi-adc.c | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/drivers/iio/adc/adi-axi-adc.c b/drivers/iio/adc/adi-axi-adc.c
> index 272d82c6e887..872ff51e08a7 100644
> --- a/drivers/iio/adc/adi-axi-adc.c
> +++ b/drivers/iio/adc/adi-axi-adc.c
> @@ -46,6 +46,7 @@
> #define ADI_AXI_ADC_CTRL_DDR_EDGESEL_MASK BIT(1)
>
> #define ADI_AXI_ADC_REG_CNTRL_3 0x004c
> +#define AD485X_CNTRL_3_OS_EN_MSK BIT(2)
> #define AD485X_CNTRL_3_PACKET_FORMAT_MSK GENMASK(1, 0)
> #define AD485X_PACKET_FORMAT_20BIT 0x0
> #define AD485X_PACKET_FORMAT_24BIT 0x1
> @@ -363,6 +364,28 @@ static int axi_adc_data_size_set(struct iio_backend *back, unsigned int size)
> FIELD_PREP(AD485X_CNTRL_3_PACKET_FORMAT_MSK, val));
> }
>
> +static int axi_adc_oversampling_ratio_set(struct iio_backend *back,
Same thing David pointed out in previous patch applies here.
axi_adc_ad4851_oversampling_ration_set() or something like that.
> + unsigned int ratio)
> +{
> + struct adi_axi_adc_state *st = iio_backend_get_priv(back);
> +
> + /* The current state of the function enables or disables the
> + * oversampling in REG_CNTRL_3 register. A ratio equal to 1 implies no
> + * oversampling, while a value greater than 1 implies oversampling being
> + * enabled.
> + */
> + switch (ratio) {
> + case 0:
> + return -EINVAL;
> + case 1:
> + return regmap_clear_bits(st->regmap, ADI_AXI_ADC_REG_CNTRL_3,
> + AD485X_CNTRL_3_OS_EN_MSK);
> + default:
> + return regmap_set_bits(st->regmap, ADI_AXI_ADC_REG_CNTRL_3,
> + AD485X_CNTRL_3_OS_EN_MSK);
> + }
> +}
> +
> static struct iio_buffer *axi_adc_request_buffer(struct iio_backend *back,
> struct iio_dev *indio_dev)
> {
> @@ -428,6 +451,7 @@ static const struct iio_backend_ops adi_ad485x_ops = {
> .chan_status = axi_adc_chan_status,
> .interface_type_get = axi_adc_interface_type_get,
> .data_size_set = axi_adc_data_size_set,
> + .oversampling_ratio_set = axi_adc_oversampling_ratio_set,
> .debugfs_reg_access = iio_backend_debugfs_ptr(axi_adc_reg_access),
> .debugfs_print_chan_status = iio_backend_debugfs_ptr(axi_adc_debugfs_print_chan_status),
> };
