On 2/7/25 8:09 AM, Antoniu Miclaus wrote:
> Add support for the AD485X a fully buffered, 8-channel simultaneous
> sampling, 16/20-bit, 1 MSPS data acquisition system (DAS) with
> differential, wide common-mode range inputs.
>
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
> ---
...
> +static int ad4851_parse_channels_common(struct iio_dev *indio_dev,
> + struct iio_chan_spec **chans,
> + const struct iio_chan_spec ad4851_chan)
> +{
> + struct ad4851_state *st = iio_priv(indio_dev);
> + struct device *dev = &st->spi->dev;
> + struct iio_chan_spec *channels, *chan_start;
> + unsigned int num_channels, reg;
> + unsigned int index = 0;
> + int ret;
> +
> + num_channels = device_get_child_node_count(dev);
> + if (num_channels > AD4851_MAX_CH_NR)
> + return dev_err_probe(dev, -EINVAL, "Too many channels: %u\n",
> + num_channels);
> +
> + channels = devm_kcalloc(dev, num_channels, sizeof(*channels), GFP_KERNEL);
> + if (!channels)
> + return -ENOMEM;
> +
> + chan_start = channels;
> +
> + device_for_each_child_node_scoped(dev, child) {
> + ret = fwnode_property_read_u32(child, "reg", ®);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "Missing channel number\n");
> + if (reg >= AD4851_MAX_CH_NR)
> + return dev_err_probe(dev, ret,
ret will be == 0 here, so need to replace with -EINVAL.
> + "Invalid channel number\n");
