On 27.01.2025 10:31 AM, Sricharan R wrote:
> From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
>
> CPU on Qualcomm ipq5424 is clocked by huayra PLL with RCG support.
> Add support for the APSS PLL, RCG and clock enable for ipq5424.
> The PLL, RCG register space are clubbed. Hence adding new APSS driver
> for both PLL and RCG/CBC control. Also the L3 cache has a separate pll
> and needs to be scaled along with the CPU.
>
> Co-developed-by: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
> Signed-off-by: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
> ---
[...]
> +#define GPLL0_CLK_RATE 800000000
> +#define CPU_NOM_CLK_RATE 1416000000
> +#define CPU_TURBO_CLK_RATE 1800000000
> +#define L3_NOM_CLK_RATE 984000000
> +#define L3_TURBO_CLK_RATE 1272000000
Please inline these values
> +
> +enum {
> + P_XO,
> + P_GPLL0,
> + P_APSS_PLL_EARLY,
> + P_L3_PLL,
> +};
> +
> +struct apss_clk {
> + struct notifier_block cpu_clk_notifier;
> + struct clk_hw *hw;
> + struct device *dev;
> + struct clk *l3_clk;
> +};
> +
> +static struct clk_branch l3_core_clk = {
> + .halt_reg = 0x1008c,
> + .clkr = {
> + .enable_reg = 0x1008c,
> + .enable_mask = BIT(0),
> + .hw.init = &(struct clk_init_data){
> + .name = "l3_clk",
> + .parent_hws = (const struct clk_hw *[]){
> + &l3_clk_src.clkr.hw },
&l3_clk_src.clkr.hw
},
> +static unsigned long get_l3_clk_from_tbl(unsigned long rate)
> +{
> + struct clk_rcg2 *l3_rcg2 = container_of(&l3_clk_src.clkr, struct clk_rcg2, clkr);
> + u8 max_clk = sizeof(ftbl_apss_clk_src) / sizeof(struct freq_tbl);
> + u8 loop;
> +
> + for (loop = 0; loop < max_clk; loop++)
> + if (ftbl_apss_clk_src[loop].freq == rate)
> + return l3_rcg2->freq_tbl[loop].freq;
This looks extremely explosive if anyone makes changes to the driver..
Use an OPP table in the devicetree instead
And please add a newline before the return statement
> + return 0;
> +}
> +
> +static int cpu_clk_notifier_fn(struct notifier_block *nb, unsigned long action,
> + void *data)
> +{
> + struct apss_clk *apss_ipq5424_cfg = container_of(nb, struct apss_clk, cpu_clk_notifier);
> + struct clk_notifier_data *cnd = (struct clk_notifier_data *)data;
> + struct device *dev = apss_ipq5424_cfg->dev;
> + unsigned long rate = 0, l3_rate;
> + int err = 0;
Please use 'ret'
> +
> + dev_dbg(dev, "action:%ld old_rate:%ld new_rate:%ld\n", action,
> + cnd->old_rate, cnd->new_rate);
> +
> + switch (action) {
> + case PRE_RATE_CHANGE:
> + if (cnd->old_rate < cnd->new_rate)
> + rate = cnd->new_rate;
> + break;
Why are the breaks indented like this?
> + case POST_RATE_CHANGE:
> + if (cnd->old_rate > cnd->new_rate)
> + rate = cnd->new_rate;
> + break;
> + };
> +
> + if (!rate)
> + goto notif_ret;
In cases like these, just return directly instead of jumping
> +
> + l3_rate = get_l3_clk_from_tbl(rate);
> + if (!l3_rate) {
> + dev_err(dev, "Failed to get l3 clock rate from l3_tbl\n");
> + return NOTIFY_BAD;
> + }
> +
> + err = clk_set_rate(apss_ipq5424_cfg->l3_clk, l3_rate);
> + if (err) {
> + dev_err(dev, "Failed to set l3 clock rate(%ld) err(%d)\n", l3_rate, err);
> + return NOTIFY_BAD;
> + }
> +
> +notif_ret:
> + return NOTIFY_OK;
> +}
> +
> +static int apss_ipq5424_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct apss_clk *apss_ipq5424_cfg;
> + struct regmap *regmap;
> + void __iomem *base;
> + int ret;
> +
> + apss_ipq5424_cfg = devm_kzalloc(&pdev->dev, sizeof(struct apss_clk), GFP_KERNEL);
Since there is no "config" in there, something like "ipq5424_apsscc" would be
more fitting
> + if (IS_ERR_OR_NULL(apss_ipq5424_cfg))
> + return PTR_ERR(apss_ipq5424_cfg);
https://elixir.bootlin.com/linux/v6.13/source/include/linux/device.h#L326-L329
|_
> elixir.bootlin.com/linux/v6.13/source/drivers/base/devres.c#L819-L820
It can never throw an errno, just check for if (!apss...)
> +
> + base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + regmap = devm_regmap_init_mmio(dev, base, &apss_ipq5424_regmap_config);
> + if (!regmap)
> + return PTR_ERR(regmap);
devm_platform_get_and_ioremap_resource()
> +
> + clk_alpha_pll_configure(&ipq5424_l3_pll, regmap, &l3_pll_config);
> +
> + clk_alpha_pll_configure(&ipq5424_apss_pll, regmap, &apss_pll_config);
> +
> + ret = qcom_cc_really_probe(dev, &apss_ipq5424_desc, regmap);
> + if (ret)
> + return ret;
> +
> + dev_dbg(&pdev->dev, "Registered APSS & L3 clock provider\n");
> +
> + apss_ipq5424_cfg->dev = dev;
> + apss_ipq5424_cfg->hw = &apss_silver_clk_src.clkr.hw;
> + apss_ipq5424_cfg->cpu_clk_notifier.notifier_call = cpu_clk_notifier_fn;
> +
> + apss_ipq5424_cfg->l3_clk = clk_hw_get_clk(&l3_core_clk.clkr.hw, "l3_clk");
> + if (IS_ERR(apss_ipq5424_cfg->l3_clk)) {
> + dev_err(&pdev->dev, "Failed to get L3 clk, %ld\n",
> + PTR_ERR(apss_ipq5424_cfg->l3_clk));
> + return PTR_ERR(apss_ipq5424_cfg->l3_clk);
> + }
Now that you'll use OPP, you can drop all this getting.. maybe even the
apss_ipq5424_cfg struct could be let go
> +
> + ret = devm_clk_notifier_register(&pdev->dev, apss_ipq5424_cfg->hw->clk,
> + &apss_ipq5424_cfg->cpu_clk_notifier);
> + if (ret)
> + return ret;
> +
> + return 0;
Just return ret instead
> +}
> +
> +static const struct of_device_id apss_ipq5424_match_table[] = {
> + { .compatible = "qcom,ipq5424-apss-clk" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, apss_ipq5424_match_table);
> +
> +static struct platform_driver apss_ipq5424_driver = {
> + .probe = apss_ipq5424_probe,
> + .driver = {
> + .name = "apss-ipq5424-clk",
> + .of_match_table = apss_ipq5424_match_table,
> + },
> +};
> +
> +module_platform_driver(apss_ipq5424_driver);
> +
> +MODULE_DESCRIPTION("QCOM APSS IPQ5424 CLK Driver");
> +MODULE_LICENSE("GPL v2");
Please don't skip running 'checkpatch'.
Konrad
