Ad7768-1 has a different -3db frequency multiplier depending on
the filter type configured. The cutoff frequency also varies according
to the current ODR.
Add a readonly low pass -3dB frequency cutoff attribute to clarify to
the user which bandwidth is being allowed depending on the filter
configurations.
Signed-off-by: Jonathan Santos <Jonathan.Santos@xxxxxxxxxx>
---
v2 Changes:
* New patch in v2.
---
drivers/iio/adc/ad7768-1.c | 23 +++++++++++++++++++++--
1 file changed, 21 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/adc/ad7768-1.c b/drivers/iio/adc/ad7768-1.c
index 6d0b430a8d54..daf91ef6f77b 100644
--- a/drivers/iio/adc/ad7768-1.c
+++ b/drivers/iio/adc/ad7768-1.c
@@ -149,6 +149,18 @@ enum ad7768_scan_type {
AD7768_SCAN_TYPE_HIGH_SPEED,
};
+/*
+ * -3dB cutoff frequency multipliers (relative to ODR) for
+ * each filter type. Values are multiplied by 1000.
+ */
+static const int ad7768_filter_3db_odr_multiplier[] = {
+ [SINC5] = 204,
+ [SINC5_DEC_X8] = 204,
+ [SINC5_DEC_X16] = 204,
+ [SINC3] = 261,
+ [WIDEBAND] = 433,
+};
+
static const int ad7768_mclk_div_rates[4] = {
16, 8, 4, 2,
};
@@ -202,7 +214,8 @@ static const struct iio_chan_spec ad7768_channels[] = {
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) |
- BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO) |
+ BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
.ext_info = ad7768_ext_info,
.indexed = 1,
.channel = 0,
@@ -802,7 +815,7 @@ static int ad7768_read_raw(struct iio_dev *indio_dev,
{
struct ad7768_state *st = iio_priv(indio_dev);
const struct iio_scan_type *scan_type;
- int scale_uv, ret;
+ int scale_uv, ret, temp;
scan_type = iio_get_current_scan_type(indio_dev, chan);
if (IS_ERR(scan_type))
@@ -842,6 +855,12 @@ static int ad7768_read_raw(struct iio_dev *indio_dev,
case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
*val = st->oversampling_ratio;
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+ temp = st->samp_freq * ad7768_filter_3db_odr_multiplier[st->filter_type];
+ *val = DIV_ROUND_CLOSEST(temp, 1000);
+
return IIO_VAL_INT;
}
--
2.34.1
