Use the header with DSI phy clock IDs to make code more readable. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- Depends on: https://lore.kernel.org/all/20250127132105.107138-1-krzysztof.kozlowski@xxxxxxxxxx/ --- arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 3 ++- arch/arm64/boot/dts/qcom/sm8150.dtsi | 17 +++++++++-------- 2 files changed, 11 insertions(+), 9 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts index 6ea883b1edfa6c511730550f4db0cb9c25fc633d..20587535ccef881df1cdff33f5d21dc1765949bd 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts @@ -500,7 +500,8 @@ &mdss_dsi1 { qcom,dual-dsi-mode; /* DSI1 is slave, so use DSI0 clocks */ - assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 4dbda54b47a54d1fa9c3fbeb441f8bc852e52f75..2aca3fdae47ceef9b3030613ec2b8f3a6c1a3356 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -12,6 +12,7 @@ #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,dispcc-sm8150.h> +#include <dt-bindings/clock/qcom,dsi-phy-28nm.h> #include <dt-bindings/clock/qcom,gcc-sm8150.h> #include <dt-bindings/clock/qcom,gpucc-sm8150.h> #include <dt-bindings/clock/qcom,videocc-sm8150.h> @@ -3981,8 +3982,8 @@ mdss_dsi0: dsi@ae94000 { assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; - assigned-clock-parents = <&mdss_dsi0_phy 0>, - <&mdss_dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd SM8150_MMCX>; @@ -4074,8 +4075,8 @@ mdss_dsi1: dsi@ae96000 { assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; - assigned-clock-parents = <&mdss_dsi1_phy 0>, - <&mdss_dsi1_phy 1>; + assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>; operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd SM8150_MMCX>; @@ -4130,10 +4131,10 @@ dispcc: clock-controller@af00000 { compatible = "qcom,sm8150-dispcc"; reg = <0 0x0af00000 0 0x10000>; clocks = <&rpmhcc RPMH_CXO_CLK>, - <&mdss_dsi0_phy 0>, - <&mdss_dsi0_phy 1>, - <&mdss_dsi1_phy 0>, - <&mdss_dsi1_phy 1>, + <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, + <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>, <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; clock-names = "bi_tcxo", -- 2.43.0
