Use the header with DSI phy clock IDs to make code more readable. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- Depends on: https://lore.kernel.org/all/20250127132105.107138-1-krzysztof.kozlowski@xxxxxxxxxx/ --- arch/arm64/boot/dts/qcom/sm8550.dtsi | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index eac8de4005d82f246bc50f64f09515631d895c99..20d04488274aa0fb4b135008d5fcc45315595c46 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -3,6 +3,7 @@ * Copyright (c) 2022, Linaro Limited */ +#include <dt-bindings/clock/qcom,dsi-phy-28nm.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,sm8450-videocc.h> #include <dt-bindings/clock/qcom,sm8550-camcc.h> @@ -3215,8 +3216,8 @@ mdss_dsi0: dsi@ae94000 { assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; - assigned-clock-parents = <&mdss_dsi0_phy 0>, - <&mdss_dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; operating-points-v2 = <&mdss_dsi_opp_table>; @@ -3310,8 +3311,8 @@ mdss_dsi1: dsi@ae96000 { assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; - assigned-clock-parents = <&mdss_dsi1_phy 0>, - <&mdss_dsi1_phy 1>; + assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>; operating-points-v2 = <&mdss_dsi_opp_table>; @@ -3369,10 +3370,10 @@ dispcc: clock-controller@af00000 { <&bi_tcxo_ao_div2>, <&gcc GCC_DISP_AHB_CLK>, <&sleep_clk>, - <&mdss_dsi0_phy 0>, - <&mdss_dsi0_phy 1>, - <&mdss_dsi1_phy 0>, - <&mdss_dsi1_phy 1>, + <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, + <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>, <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>, <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, <0>, /* dp1 */ -- 2.43.0
