Use the header with DSI phy clock IDs to make code more readable. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- Depends on: https://lore.kernel.org/all/20250127132105.107138-1-krzysztof.kozlowski@xxxxxxxxxx/ Please wait with merging till this hit mainline. --- arch/arm/boot/dts/qcom/qcom-msm8226.dtsi | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi index 64c8ac94f352e46dc4a18f902d2c30114ecd91d2..c84320ef5ca24effc50a6f22ee3b403d6d6e85bf 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi @@ -6,6 +6,7 @@ /dts-v1/; #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,dsi-phy-28nm.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> #include <dt-bindings/clock/qcom,mmcc-msm8974.h> #include <dt-bindings/clock/qcom,rpmcc.h> @@ -983,8 +984,8 @@ mmcc: clock-controller@fd8c0000 { <&gcc GPLL0_VOTE>, <&gcc GPLL1_VOTE>, <&rpmcc RPM_SMD_GFX3D_CLK_SRC>, - <&mdss_dsi0_phy 1>, - <&mdss_dsi0_phy 0>; + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, + <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>; clock-names = "xo", "mmss_gpll0_vote", "gpll0_vote", @@ -1060,8 +1061,8 @@ mdss_dsi0: dsi@fd922800 { assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; - assigned-clock-parents = <&mdss_dsi0_phy 0>, - <&mdss_dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; clocks = <&mmcc MDSS_MDP_CLK>, <&mmcc MDSS_AHB_CLK>, -- 2.43.0
