From: "J. Neuschäfer" <j.ne@xxxxxxxxxx> fsl-spi.txt contains the bindings for the fsl,spi and fsl,espi contollers. Convert them to YAML. Signed-off-by: J. Neuschäfer <j.ne@xxxxxxxxxx> --- .../devicetree/bindings/spi/fsl,espi.yaml | 56 +++++++++++++++++ Documentation/devicetree/bindings/spi/fsl,spi.yaml | 71 ++++++++++++++++++++++ Documentation/devicetree/bindings/spi/fsl-spi.txt | 62 ------------------- 3 files changed, 127 insertions(+), 62 deletions(-) diff --git a/Documentation/devicetree/bindings/spi/fsl,espi.yaml b/Documentation/devicetree/bindings/spi/fsl,espi.yaml new file mode 100644 index 0000000000000000000000000000000000000000..350275760210c5763af0c7b1e1522ccbfb97eec7 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/fsl,espi.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/fsl,espi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale eSPI (Enhanced Serial Peripheral Interface) controller + +maintainers: + - J. Neuschäfer <j.ne@xxxxxxxxxx> + +properties: + compatible: + const: fsl,mpc8536-espi + + reg: + maxItems: 1 + + interrupts: true + + fsl,espi-num-chipselects: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The number of the chipselect signals. + + fsl,csbef: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Chip select assertion time in bits before frame starts + + fsl,csaft: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Chip select negation time in bits after frame ends + +required: + - compatible + - reg + - interrupts + - fsl,espi-num-chipselects + +allOf: + - $ref: spi-controller.yaml# + +unevaluatedProperties: false + +examples: + - | + spi@110000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8536-espi"; + reg = <0x110000 0x1000>; + interrupts = <53 0x2>; + interrupt-parent = <&mpic>; + fsl,espi-num-chipselects = <4>; + fsl,csbef = <1>; + fsl,csaft = <1>; + }; diff --git a/Documentation/devicetree/bindings/spi/fsl,spi.yaml b/Documentation/devicetree/bindings/spi/fsl,spi.yaml new file mode 100644 index 0000000000000000000000000000000000000000..8efa971b5954a93665cb624345774f2966bb5648 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/fsl,spi.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/fsl,spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale SPI (Serial Peripheral Interface) controller + +maintainers: + - J. Neuschäfer <j.ne@xxxxxxxxxx> + +properties: + compatible: + enum: + - fsl,spi + - aeroflexgaisler,spictrl + + reg: + maxItems: 1 + + cell-index: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + QE SPI subblock index. + 0: QE subblock SPI1 + 1: QE subblock SPI2 + + mode: + description: SPI operation mode + enum: + - cpu + - cpu-qe + + interrupts: true + + clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: input clock frequency to non FSL_SOC cores + + cs-gpios: true + + fsl,spisel_boot: + $ref: /schemas/types.yaml#/definitions/flag + description: + For the MPC8306 and MPC8309, specifies that the SPISEL_BOOT signal is used + as chip select for a slave device. Use reg = <number of gpios> in the + corresponding child node, i.e. 0 if the cs-gpios property is not present. + +required: + - compatible + - reg + - mode + - interrupts + +allOf: + - $ref: spi-controller.yaml# + +unevaluatedProperties: false + +examples: + - | + spi@4c0 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x4c0 0x40>; + interrupts = <82 0>; + interrupt-parent = <&intc>; + mode = "cpu"; + cs-gpios = <&gpio 18 1 // device reg=<0> + &gpio 19 1>; // device reg=<1> + }; diff --git a/Documentation/devicetree/bindings/spi/fsl-spi.txt b/Documentation/devicetree/bindings/spi/fsl-spi.txt deleted file mode 100644 index 0654380eb7515d8bda80eea1486e77b939ac38d8..0000000000000000000000000000000000000000 --- a/Documentation/devicetree/bindings/spi/fsl-spi.txt +++ /dev/null @@ -1,62 +0,0 @@ -* SPI (Serial Peripheral Interface) - -Required properties: -- cell-index : QE SPI subblock index. - 0: QE subblock SPI1 - 1: QE subblock SPI2 -- compatible : should be "fsl,spi" or "aeroflexgaisler,spictrl". -- mode : the SPI operation mode, it can be "cpu" or "cpu-qe". -- reg : Offset and length of the register set for the device -- interrupts : <a b> where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. -- clock-frequency : input clock frequency to non FSL_SOC cores - -Optional properties: -- cs-gpios : specifies the gpio pins to be used for chipselects. - The gpios will be referred to as reg = <index> in the SPI child nodes. - If unspecified, a single SPI device without a chip select can be used. -- fsl,spisel_boot : for the MPC8306 and MPC8309, specifies that the - SPISEL_BOOT signal is used as chip select for a slave device. Use - reg = <number of gpios> in the corresponding child node, i.e. 0 if - the cs-gpios property is not present. - -Example: - spi@4c0 { - cell-index = <0>; - compatible = "fsl,spi"; - reg = <4c0 40>; - interrupts = <82 0>; - interrupt-parent = <700>; - mode = "cpu"; - cs-gpios = <&gpio 18 1 // device reg=<0> - &gpio 19 1>; // device reg=<1> - }; - - -* eSPI (Enhanced Serial Peripheral Interface) - -Required properties: -- compatible : should be "fsl,mpc8536-espi". -- reg : Offset and length of the register set for the device. -- interrupts : should contain eSPI interrupt, the device has one interrupt. -- fsl,espi-num-chipselects : the number of the chipselect signals. - -Optional properties: -- fsl,csbef: chip select assertion time in bits before frame starts -- fsl,csaft: chip select negation time in bits after frame ends - -Example: - spi@110000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc8536-espi"; - reg = <0x110000 0x1000>; - interrupts = <53 0x2>; - interrupt-parent = <&mpic>; - fsl,espi-num-chipselects = <4>; - fsl,csbef = <1>; - fsl,csaft = <1>; - }; -- 2.48.0.rc1.219.gb6b6757d772
