From: "J. Neuschäfer" <j.ne@xxxxxxxxxx> The devicetree bindings for Freescale DMA engines have so far existed as a text file. This patch converts them to YAML, and specifies all the compatible strings currently in use in arch/powerpc/boot/dts. Signed-off-by: J. Neuschäfer <j.ne@xxxxxxxxxx> --- .../devicetree/bindings/dma/fsl,elo-dma.yaml | 129 +++++++++++++ .../devicetree/bindings/dma/fsl,elo3-dma.yaml | 105 +++++++++++ .../devicetree/bindings/dma/fsl,eloplus-dma.yaml | 120 ++++++++++++ .../devicetree/bindings/powerpc/fsl/dma.txt | 204 --------------------- 4 files changed, 354 insertions(+), 204 deletions(-) diff --git a/Documentation/devicetree/bindings/dma/fsl,elo-dma.yaml b/Documentation/devicetree/bindings/dma/fsl,elo-dma.yaml new file mode 100644 index 0000000000000000000000000000000000000000..d1f4978a672c1217c322c27f243470b2de8c99d4 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/fsl,elo-dma.yaml @@ -0,0 +1,129 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/fsl,elo-dma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Elo DMA Controller + +maintainers: + - J. Neuschäfer <j.ne@xxxxxxxxxx> + +description: | + This is a little-endian 4-channel DMA controller, used in Freescale mpc83xx + series chips such as mpc8315, mpc8349, mpc8379 etc. + + Note on DMA channel compatible properties: The compatible property must say + "fsl,elo-dma-channel" or "fsl,eloplus-dma-channel" to be used by the Elo DMA + driver (fsldma). Any DMA channel used by fsldma cannot be used by another + DMA driver, such as the SSI sound drivers for the MPC8610. Therefore, any + DMA channel that should be used for another driver should not use + "fsl,elo-dma-channel" or "fsl,eloplus-dma-channel". For the SSI drivers, for + example, the compatible property should be "fsl,ssi-dma-channel". See + ssi.txt for more information. + +properties: + compatible: + items: + - enum: + - fsl,mpc8313-dma + - fsl,mpc8315-dma + - fsl,mpc8323-dma + - fsl,mpc8347-dma + - fsl,mpc8349-dma + - fsl,mpc8360-dma + - fsl,mpc8377-dma + - fsl,mpc8378-dma + - fsl,mpc8379-dma + - const: fsl,elo-dma + + reg: + maxItems: 1 + description: + DMA General Status Register, i.e. DGSR which contains status for + all the 4 DMA channels. + + ranges: true + + cell-index: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Controller index. 0 for controller @ 0x8100. + + interrupts: + maxItems: 1 + +patternProperties: + "^dma-channel@.*$": + type: object + + properties: + compatible: + items: + - enum: + - fsl,mpc8315-dma-channel + - fsl,mpc8323-dma-channel + - fsl,mpc8347-dma-channel + - fsl,mpc8349-dma-channel + - fsl,mpc8360-dma-channel + - fsl,mpc8377-dma-channel + - fsl,mpc8378-dma-channel + - fsl,mpc8379-dma-channel + - const: fsl,elo-dma-channel + + reg: + maxItems: 1 + + cell-index: + description: DMA channel index starts at 0. + + interrupts: true + +required: + - compatible + - reg + - interrupts + +additionalProperties: true + +examples: + - | + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8349-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a4>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + cell-index = <0>; + reg = <0 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + cell-index = <1>; + reg = <0x80 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + cell-index = <2>; + reg = <0x100 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + cell-index = <3>; + reg = <0x180 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/dma/fsl,elo3-dma.yaml b/Documentation/devicetree/bindings/dma/fsl,elo3-dma.yaml new file mode 100644 index 0000000000000000000000000000000000000000..d4853ffd40dc75c7fcdc0dfb15e497ec56f3e1ba --- /dev/null +++ b/Documentation/devicetree/bindings/dma/fsl,elo3-dma.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/fsl,elo3-dma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Elo3 DMA Controller + +maintainers: + - J. Neuschäfer <j.ne@xxxxxxxxxx> + +description: | + DMA controller which has same function as EloPlus except that Elo3 has 8 + channels while EloPlus has only 4, it is used in Freescale Txxx and Bxxx + series chips, such as t1040, t4240, b4860. + + Note on DMA channel compatible properties: The compatible property must say + "fsl,elo-dma-channel" or "fsl,eloplus-dma-channel" to be used by the Elo DMA + driver (fsldma). Any DMA channel used by fsldma cannot be used by another + DMA driver, such as the SSI sound drivers for the MPC8610. Therefore, any DMA + channel that should be used for another driver should not use + "fsl,elo-dma-channel" or "fsl,eloplus-dma-channel". For the SSI drivers, for + example, the compatible property should be "fsl,ssi-dma-channel". See ssi.txt + for more information. + +properties: + compatible: + const: fsl,elo3-dma + + reg: + maxItems: 2 + description: | + contains two entries for DMA General Status Registers, i.e. DGSR0 which + includes status for channel 1~4, and DGSR1 for channel 5~8 + + interrupts: + maxItems: 1 + +patternProperties: + "^dma-channel@.*$": + type: object + + properties: + compatible: + const: fsl,eloplus-dma-channel + + reg: + maxItems: 1 + + interrupts: true + +examples: + - | + dma@100300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elo3-dma"; + reg = <0x100300 0x4>, + <0x100600 0x4>; + ranges = <0x0 0x100100 0x500>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + interrupts = <28 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + interrupts = <29 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + interrupts = <30 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + interrupts = <31 2 0 0>; + }; + dma-channel@300 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x300 0x80>; + interrupts = <76 2 0 0>; + }; + dma-channel@380 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x380 0x80>; + interrupts = <77 2 0 0>; + }; + dma-channel@400 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x400 0x80>; + interrupts = <78 2 0 0>; + }; + dma-channel@480 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x480 0x80>; + interrupts = <79 2 0 0>; + }; + }; + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/dma/fsl,eloplus-dma.yaml b/Documentation/devicetree/bindings/dma/fsl,eloplus-dma.yaml new file mode 100644 index 0000000000000000000000000000000000000000..680d64332ddf4d6d68ee8c607ac71211a7e19e6e --- /dev/null +++ b/Documentation/devicetree/bindings/dma/fsl,eloplus-dma.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/fsl,eloplus-dma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale EloPlus DMA Controller + +maintainers: + - J. Neuschäfer <j.ne@xxxxxxxxxx> + +description: | + This is a 4-channel DMA controller with extended addresses and chaining, + mainly used in Freescale mpc85xx/86xx, Pxxx and BSC series chips, such as + mpc8540, mpc8641 p4080, bsc9131 etc. + + Note on DMA channel compatible properties: The compatible property must say + "fsl,elo-dma-channel" or "fsl,eloplus-dma-channel" to be used by the Elo DMA + driver (fsldma). Any DMA channel used by fsldma cannot be used by another + DMA driver, such as the SSI sound drivers for the MPC8610. Therefore, any DMA + channel that should be used for another driver should not use + "fsl,elo-dma-channel" or "fsl,eloplus-dma-channel". For the SSI drivers, for + example, the compatible property should be "fsl,ssi-dma-channel". See ssi.txt + for more information. + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,mpc8540-dma + - fsl,mpc8541-dma + - fsl,mpc8548-dma + - fsl,mpc8555-dma + - fsl,mpc8560-dma + - fsl,mpc8572-dma + - fsl,mpc8641-dma + - const: fsl,eloplus-dma + - const: fsl,eloplus-dma + + reg: + maxItems: 1 + description: + DMA General Status Register, i.e. DGSR which contains + status for all the 4 DMA channels + + cell-index: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + controller index. 0 for controller @ 0x21000, 1 for controller @ 0xc000 + + interrupts: + maxItems: 1 + +patternProperties: + "^dma-channel@.*$": + type: object + + properties: + compatible: + items: + - enum: + - fsl,mpc8540-dma-channel + - fsl,mpc8541-dma-channel + - fsl,mpc8548-dma-channel + - fsl,mpc8555-dma-channel + - fsl,mpc8560-dma-channel + - fsl,mpc8572-dma-channel + - const: fsl,eloplus-dma-channel + + reg: + maxItems: 1 + + cell-index: + description: DMA channel index starts at 0. + + interrupts: true + +examples: + - | + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma"; + reg = <0x21300 4>; + ranges = <0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt deleted file mode 100644 index c11ad5c6db2190bf38c160632d9997122e169945..0000000000000000000000000000000000000000 --- a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt +++ /dev/null @@ -1,204 +0,0 @@ -* Freescale DMA Controllers - -** Freescale Elo DMA Controller - This is a little-endian 4-channel DMA controller, used in Freescale mpc83xx - series chips such as mpc8315, mpc8349, mpc8379 etc. - -Required properties: - -- compatible : must include "fsl,elo-dma" -- reg : DMA General Status Register, i.e. DGSR which contains - status for all the 4 DMA channels -- ranges : describes the mapping between the address space of the - DMA channels and the address space of the DMA controller -- cell-index : controller index. 0 for controller @ 0x8100 -- interrupts : interrupt specifier for DMA IRQ - -- DMA channel nodes: - - compatible : must include "fsl,elo-dma-channel" - However, see note below. - - reg : DMA channel specific registers - - cell-index : DMA channel index starts at 0. - -Optional properties: - - interrupts : interrupt specifier for DMA channel IRQ - (on 83xx this is expected to be identical to - the interrupts property of the parent node) - -Example: - dma@82a8 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8349-dma", "fsl,elo-dma"; - reg = <0x82a8 4>; - ranges = <0 0x8100 0x1a4>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - cell-index = <0>; - reg = <0 0x80>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@80 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - cell-index = <1>; - reg = <0x80 0x80>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@100 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - cell-index = <2>; - reg = <0x100 0x80>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@180 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - cell-index = <3>; - reg = <0x180 0x80>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - }; - -** Freescale EloPlus DMA Controller - This is a 4-channel DMA controller with extended addresses and chaining, - mainly used in Freescale mpc85xx/86xx, Pxxx and BSC series chips, such as - mpc8540, mpc8641 p4080, bsc9131 etc. - -Required properties: - -- compatible : must include "fsl,eloplus-dma" -- reg : DMA General Status Register, i.e. DGSR which contains - status for all the 4 DMA channels -- cell-index : controller index. 0 for controller @ 0x21000, - 1 for controller @ 0xc000 -- ranges : describes the mapping between the address space of the - DMA channels and the address space of the DMA controller - -- DMA channel nodes: - - compatible : must include "fsl,eloplus-dma-channel" - However, see note below. - - cell-index : DMA channel index starts at 0. - - reg : DMA channel specific registers - - interrupts : interrupt specifier for DMA channel IRQ - -Example: - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma"; - reg = <0x21300 4>; - ranges = <0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - -** Freescale Elo3 DMA Controller - DMA controller which has same function as EloPlus except that Elo3 has 8 - channels while EloPlus has only 4, it is used in Freescale Txxx and Bxxx - series chips, such as t1040, t4240, b4860. - -Required properties: - -- compatible : must include "fsl,elo3-dma" -- reg : contains two entries for DMA General Status Registers, - i.e. DGSR0 which includes status for channel 1~4, and - DGSR1 for channel 5~8 -- ranges : describes the mapping between the address space of the - DMA channels and the address space of the DMA controller - -- DMA channel nodes: - - compatible : must include "fsl,eloplus-dma-channel" - - reg : DMA channel specific registers - - interrupts : interrupt specifier for DMA channel IRQ - -Example: -dma@100300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,elo3-dma"; - reg = <0x100300 0x4>, - <0x100600 0x4>; - ranges = <0x0 0x100100 0x500>; - dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - interrupts = <28 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - interrupts = <29 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - interrupts = <30 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - interrupts = <31 2 0 0>; - }; - dma-channel@300 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x300 0x80>; - interrupts = <76 2 0 0>; - }; - dma-channel@380 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x380 0x80>; - interrupts = <77 2 0 0>; - }; - dma-channel@400 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x400 0x80>; - interrupts = <78 2 0 0>; - }; - dma-channel@480 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x480 0x80>; - interrupts = <79 2 0 0>; - }; -}; - -Note on DMA channel compatible properties: The compatible property must say -"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel" to be used by the Elo DMA -driver (fsldma). Any DMA channel used by fsldma cannot be used by another -DMA driver, such as the SSI sound drivers for the MPC8610. Therefore, any DMA -channel that should be used for another driver should not use -"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel". For the SSI drivers, for -example, the compatible property should be "fsl,ssi-dma-channel". See ssi.txt -for more information. -- 2.48.0.rc1.219.gb6b6757d772
