Re: [RFC v2 PATCH 04/10] net: ti: prueth: Adds link detection, RX and TX support.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jan 24, 2025 at 07:10:50PM +0530, Basharath Hussain Khaja wrote:
> From: Roger Quadros <rogerq@xxxxxx>
> 
> Changes corresponding to link configuration such as speed and duplexity.
> IRQ and handler initializations are performed for packet reception.Firmware
> receives the packet from the wire and stores it into OCMC queue. Next, it
> notifies the CPU via interrupt. Upon receiving the interrupt CPU will
> service the IRQ and packet will be processed by pushing the newly allocated
> SKB to upper layers.
> 
> When the user application want to transmit a packet, it will invoke
> sys_send() which will inturn invoke the PRUETH driver, then it will write
> the packet into OCMC queues. PRU firmware will pick up the packet and
> transmit it on to the wire.
> 
> Signed-off-by: Roger Quadros <rogerq@xxxxxx>
> Signed-off-by: Andrew F. Davis <afd@xxxxxx>
> Signed-off-by: Parvathi Pudi <parvathi@xxxxxxxxxxx>
> Signed-off-by: Basharath Hussain Khaja <basharath@xxxxxxxxxxx>
> ---
>  drivers/net/ethernet/ti/icssm/icssm_prueth.c | 599 ++++++++++++++++++-
>  drivers/net/ethernet/ti/icssm/icssm_prueth.h |  46 ++
>  2 files changed, 640 insertions(+), 5 deletions(-)

Looks like this patch was duplicated and posted twice ?




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux