Re: [PATCH 4/6] thermal: renesas: rzg3s: Add thermal driver for the Renesas RZ/G3S SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Claudiu,

CC iio

On Fri, Jan 3, 2025 at 5:38 PM Claudiu <claudiu.beznea@xxxxxxxxx> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
>
> The Renesas RZ/G3S SoC features a Thermal Sensor Unit (TSU) that reports
> the junction temperature. The temperature is reported through a dedicated
> ADC channel. Add a driver for the Renesas RZ/G3S TSU.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>

Thanks for your patch!

> --- /dev/null
> +++ b/drivers/thermal/renesas/rzg3s_thermal.c

> +static int rzg3s_thermal_probe(struct platform_device *pdev)
> +{
> +       struct rzg3s_thermal_priv *priv;
> +       struct device *dev = &pdev->dev;
> +       int ret;
> +
> +       priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +       if (!priv)
> +               return -ENOMEM;
> +
> +       priv->base = devm_platform_ioremap_resource(pdev, 0);
> +       if (IS_ERR(priv->base))
> +               return PTR_ERR(priv->base);
> +
> +       priv->channel = devm_iio_channel_get(dev, "tsu");

Given there's only a single IIO channel, you could pass NULL instead
of the name, and drop "io-channel-names" from the DT bindings.
I don't know what's the IIO policy w.r.t. unnamed channels, though.

> +       if (IS_ERR(priv->channel))
> +               return dev_err_probe(dev, PTR_ERR(priv->channel), "Failed to get IIO channel!\n");
> +
> +       priv->rstc = devm_reset_control_get_exclusive_deasserted(dev, NULL);
> +       if (IS_ERR(priv->rstc))
> +               return dev_err_probe(dev, PTR_ERR(priv->rstc), "Failed to get reset!\n");
> +
> +       priv->dev = dev;
> +       priv->mode = THERMAL_DEVICE_DISABLED;
> +       platform_set_drvdata(pdev, priv);
> +
> +       pm_runtime_set_autosuspend_delay(dev, 300);
> +       pm_runtime_use_autosuspend(dev);
> +       pm_runtime_enable(dev);
> +
> +       ret = rzg3s_thermal_read_calib(priv);
> +       if (ret) {
> +               dev_err_probe(dev, ret, "Failed to read calibration data!\n");
> +               goto rpm_disable;
> +       }
> +
> +       priv->tz = thermal_of_zone_register(dev->of_node, 0, priv, &rzg3s_tz_of_ops);
> +       if (IS_ERR(priv->tz)) {
> +               dev_err_probe(dev, PTR_ERR(priv->tz), "Failed to register thermal zone!\n");
> +               goto rpm_disable;
> +       }
> +
> +       ret = thermal_add_hwmon_sysfs(priv->tz);
> +       if (ret) {
> +               dev_err_probe(dev, ret, "Failed to add hwmon sysfs!\n");
> +               goto tz_unregister;
> +       }
> +
> +       return 0;
> +
> +tz_unregister:
> +       thermal_of_zone_unregister(priv->tz);
> +rpm_disable:
> +       pm_runtime_disable(dev);
> +       pm_runtime_dont_use_autosuspend(dev);
> +       return ret;
> +}

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux