Convert intel,stratix10-svc service layer devicetree
binding file from freeform format to json-schema.
Signed-off-by: Mahesh Rao <mahesh.rao@xxxxxxxxx>
---
.../bindings/firmware/intel,stratix10-svc.txt | 57 ---------------
.../bindings/firmware/intel,stratix10-svc.yaml | 84 ++++++++++++++++++++++
2 files changed, 84 insertions(+), 57 deletions(-)
diff --git a/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt b/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt
deleted file mode 100644
index 6eff1afd8daf91714d6a18859667d2607e707da7..0000000000000000000000000000000000000000
--- a/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-Intel Service Layer Driver for Stratix10 SoC
-============================================
-Intel Stratix10 SoC is composed of a 64 bit quad-core ARM Cortex A53 hard
-processor system (HPS) and Secure Device Manager (SDM). When the FPGA is
-configured from HPS, there needs to be a way for HPS to notify SDM the
-location and size of the configuration data. Then SDM will get the
-configuration data from that location and perform the FPGA configuration.
-
-To meet the whole system security needs and support virtual machine requesting
-communication with SDM, only the secure world of software (EL3, Exception
-Layer 3) can interface with SDM. All software entities running on other
-exception layers must channel through the EL3 software whenever it needs
-service from SDM.
-
-Intel Stratix10 service layer driver, running at privileged exception level
-(EL1, Exception Layer 1), interfaces with the service providers and provides
-the services for FPGA configuration, QSPI, Crypto and warm reset. Service layer
-driver also manages secure monitor call (SMC) to communicate with secure monitor
-code running in EL3.
-
-Required properties:
--------------------
-The svc node has the following mandatory properties, must be located under
-the firmware node.
-
-- compatible: "intel,stratix10-svc" or "intel,agilex-svc"
-- method: smc or hvc
- smc - Secure Monitor Call
- hvc - Hypervisor Call
-- memory-region:
- phandle to the reserved memory node. See
- Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
- for details
-
-Example:
--------
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- service_reserved: svcbuffer@0 {
- compatible = "shared-dma-pool";
- reg = <0x0 0x0 0x0 0x1000000>;
- alignment = <0x1000>;
- no-map;
- };
- };
-
- firmware {
- svc {
- compatible = "intel,stratix10-svc";
- method = "smc";
- memory-region = <&service_reserved>;
- };
- };
diff --git a/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.yaml b/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..b8aae996da87c16007efa7e5e12cced1432b62e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/intel,stratix10-svc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Service Layer Driver for Stratix10 SoC
+
+maintainers:
+ - Dinh Nguyen <dinguyen@xxxxxxxxxx>
+
+description: |
+ Intel Stratix10 SoC is composed of a 64 bit quad-core ARM Cortex A53 hard
+ processor system (HPS) and Secure Device Manager (SDM). When the FPGA is
+ configured from HPS, there needs to be a way for HPS to notify SDM the
+ location and size of the configuration data. Then SDM will get the
+ configuration data from that location and perform the FPGA configuration.
+
+ To meet the whole system security needs and support virtual machine requesting
+ communication with SDM, only the secure world of software (EL3, Exception
+ Layer 3) can interface with SDM. All software entities running on other
+ exception layers must channel through the EL3 software whenever it needs
+ service from SDM.
+
+ Intel Stratix10 service layer driver, running at privileged exception level
+ (EL1, Exception Layer 1), interfaces with the service providers and provides
+ the services for FPGA configuration, QSPI, Crypto and warm reset. Service layer
+ driver also manages secure monitor call (SMC) to communicate with secure monitor
+ code running in EL3.
+
+properties:
+ compatible:
+ enum:
+ - intel,stratix10-svc
+ - intel,agilex-svc
+
+ method:
+ enum: [smc, hvc]
+ description: supervisory call method to be used for the service layer.
+
+ memory-region:
+ maxItems: 1
+ description:
+ phandle to a reserved memory region for the service layer driver to
+ communicate with the secure device manager. For more details see
+ Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt.
+
+ fpga-mgr:
+ $ref: /schemas/fpga/intel,stratix10-soc-fpga-mgr.yaml
+ description: Optional child node for fpga manager to perform fabric configuration.
+
+required:
+ - compatible
+ - method
+ - memory-region
+
+additionalProperties: false
+
+examples:
+ - |
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ service_reserved: svcbuffer@0 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x0 0x0 0x1000000>;
+ alignment = <0x1000>;
+ no-map;
+ };
+ };
+
+ firmware {
+ svc {
+ compatible = "intel,stratix10-svc";
+ method = "smc";
+ memory-region = <&service_reserved>;
+
+ fpga-mgr {
+ compatible = "intel,stratix10-soc-fpga-mgr";
+ };
+ };
+ };
+
--
2.35.3
