Hi Biju, On Mon, Jan 20, 2025 at 09:46:56AM +0000, Biju Das wrote: > The ICU block on the RZ/G3E SoC is almost identical to the one found on > the RZ/V2H SoC, with the following differences: > - The TINT register offset is 0x830 compared to ox30 on RZ/V2H. > - The number of supported GPIO interrupts for TINT selection is 141 > instead of 86. > - The pin index and TINT selection index are not in the 1:1 map > - The number of TSSR registers is 15 instead of 8 > - Each TSSR register can program 2 TINTs instead of 4 TINTs > > Add support for the RZ/G3E ICU driver. > > Biju Das (11): > dt-bindings: interrupt-controller: renesas,rzv2h-icu: Document RZ/G3E > SoC > clk: renesas: r9a09g047: Add ICU clock/reset > irqchip/renesas-rzv2h: Drop irqchip from struct rzv2h_icu_priv > irqchip/renesas-rzv2h: Simplify rzv2h_icu_init() > irqchip/renesas-rzv2h: Add struct rzv2h_hw_info with t_offs variable > irqchip/renesas-rzv2h: Add max_tssel variable to struct rzv2h_hw_info > irqchip/renesas-rzv2h: Add tssr_k variable to struct rzv2h_hw_info > irqchip/renesas-rzv2h: Add tssel_mask and tssel_shift variables to > struct rzv2h_hw_info > irqchip/renesas-rzv2h: Add tien variable to struct rzv2h_hw_info > irqchip/renesas-rzv2h: Add RZ/G3E support > arm64: dts: renesas: r9a09g047: Add icu node > > .../renesas,rzv2h-icu.yaml | 6 +- > arch/arm64/boot/dts/renesas/r9a09g047.dtsi | 108 ++++++++++++ > drivers/clk/renesas/r9a09g047-cpg.c | 3 + > drivers/irqchip/irq-renesas-rzv2h.c | 159 +++++++++++++----- > 4 files changed, 229 insertions(+), 47 deletions(-) > > -- > 2.43.0 For all the series: Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@xxxxxxxxxxxxxx> Thanks & Regards, Tommaso
